| MIL 10 Reference
| Customize Help
| Save Settings

MdigHalt


See also
Availability
Available in MIL-Lite
Available in MIL

Available on Windows
Available on Linux

Not supported on:
Not supported on Host system
Not supported on Matrox GPU processing driver
Fully supported on:
Fully supported on Matrox CronosPlus
Fully supported on Matrox GigE Vision driver
Fully supported on Matrox IEEE 1394 IIDC driver
Fully supported on Matrox Iris GT
Fully supported on Matrox Morphis
Fully supported on Matrox Morphis QxT
Fully supported on Matrox Orion HD
Fully supported on Matrox Radient eCL
Fully supported on Matrox Radient eV-CXP
Fully supported on Matrox Solios eA/XA
Fully supported on Matrox Solios ecl/xcl/ev-cl
Fully supported on Matrox USB3 Vision driver (requires Update 19)
Fully supported on Matrox Vio

For any information regarding a MIL system added during a MIL Update, see the MIL system’s release note

Available on Non-Matrox computer
Available on Matrox 4Sight-X
Available on Matrox 4Sight GP
Available on Matrox Supersight
function map Function map
Examples
MdigGrabWait
MdigHookFunction
Synopsis
Halt a continuous grab from an input device.
Syntax
void MdigHalt(
MIL_ID DigId //in
)
Description

This function stops the specified digitizer from grabbing data. It should be used when performing a continuous grab with MdigGrabContinuous().

This function will wait for the end of the current frame before returning, to ensure the last frame is always valid.

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.
Parameters
This function is not supported on the selected boards.
This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.
Parameter
DigId

Specifies the identifier of the digitizer.

Compilation information
Header Include mil.h.
Library Use mil.lib.
DLL Requires mil.dll.