| MIL 10 Reference
| Customize Help
| Save Settings

MmodSave


See also
Availability
Not available in MIL-Lite
Available in MIL

Available on Windows
Available on Linux with restrictions

Available on Non-Matrox computer
Available on Matrox 4Sight-X
Available on Matrox 4Sight GP
Available on Matrox Supersight
function map Function map
Examples
None.
MmodRestore
MmodStream
Synopsis
Save a Model Finder context to a file.
Syntax
void MmodSave(
MIL_CONST_TEXT_PTR FileName, //in
MIL_ID ContextId, //in
MIL_INT64 ControlFlag //in
)
Description

This function saves all the information about the previously allocated Model Finder context to disk, including all of the individual models' current settings. This information can be reloaded, using MmodRestore() or MmodStream(). However, preprocessing and all drawing control type settings are not saved.

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see if there is complementary information.
Parameters
This function is not supported on the selected boards.
Parameters
FileName

Specifies the name and path of the file in which to save the Model Finder context; it is recommended that you use the MMF file extension for easier use with other Matrox Imaging software products. The function internally handles the opening and closing of this file. If this file already exists, it will be overwritten.

This parameter can be set to one of the following values:

function map For specifying the file name and path
CollapseValue Description
Collapse M_INTERACTIVE
[This is only applicable to Windows]

Opens the File Save As dialog box from which you can interactively specify the drive, directory, and name of the file.
Collapse MIL_TEXT("FileName") 1

Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile").

To specify a file on a remote computer (under Distributed MIL), prefix the specified file name string with "remote:///" (for example, "remote:///C:\mydirectory\myfile").

(summarize)

1 If you are passing the value in a variable, don't enclose it in MIL_TEXT().

ContextId

Specifies the identifier of the Model Finder context to save.

ControlFlag

Specifies whether to save, with the Model Finder context, the calibration contexts associated with the models.

function map For specifying whether to save the calibration contexts associated with the models
CollapseValue Description
Collapse M_DEFAULT

Specifies that the calibration contexts are not saved.
Collapse M_WITH_CALIBRATION

Specifies that the calibration contexts are saved. The calibration information is saved in the same file as the Model Finder context. Note that the calibration contexts associated with synthetic models are not saved.

This setting is not supported for an M_SHAPE_CIRCLE type of Model Finder context.

(summarize)
Compilation information
Header Include mil.h.
Library Use mil.lib; milmod.lib.
DLL Requires mil.dll; milmod.dll.
INTERACTIVE DEFAULT WITH CALIBRATION