This section serves as a reference to match Matrox Morphis connectors and auxiliary signals with MIL information, such as MIL auxiliary signal numbers.
Matrox Morphis Dual and Quad have a different number of acquisition paths and auxiliary signals. For each Matrox Morphis, only the auxiliary signals associated with the following digitizer device numbers are supported:
Matrox Morphis type |
Digitizer device number |
Matrox Morphis Dual/eDual |
|
Matrox Morphis Quad/eQuad |
The following table lists the connectors of the auxiliary signals that can be used for each digitizer device number:
Digitizer device # |
Matrox Morphis Dual/eDual |
Matrox Morphis Quad/eQuad |
DBHD-44 (VIOM, P104, or HDC) and one shared between BNC (1), DB-9, HDC, and P104. |
DBHD-44 (VIOM) |
|
DBHD-44 (VIOM, P104, or HDC) and one shared between BNC (0), DB-9, HDC, and P104. |
DBHD-44 (VIOM) |
|
DBHD-44 (VIOM) |
||
DBHD-44 (VIOM) |
Auxiliary I/O signals can have one or more functionalities (for example, trigger input, user input or user output, depending on the signal). Their possible functionalities are described in their description in the pinout table below. Shared input and output signals can be accessed by the digitizers with the specified M_DEVn number. Although a shared signal can be accessed by multiple digitizers, all the functionalities supported by the signal might not be accessible by all these digitizers. In the case of shared output signals, ensure that only one digitizer is driving the output.
To set/inquire the routing, mode, or state of an auxiliary signal, use MsysControl() / MsysInquire() with M_IO_... control/inquire types, respectively. Whereas, the MIL function that you should use to act upon an input signal or setup the source of an output signal depends on the functionality. For example, you can use MsysControl() with M_USER_BIT_... control types, MdigControl() with M_GRAB_TRIGGER_... control types, or MdigControl() with M_TIMER_... control types, and you can use their corresponding MsysInquire() and MdigInquire() inquire types to inquire them. Note that, when using MsysControl() / MsysInquire(), a system with any device number can be used; whereas, when using MdigControl() / MdigInquire(), use a digitizer with the digitizer device number as specified in the pinout table below.
Only those auxiliary signals that have matching MIL information are included in this section. For information on internal connectors and a comprehensive list of all available input and output signals, refer to the board's installation and hardware reference manual.
On Matrox Morphis eDual/Dual Standard boards, two of the following connectors on the main bracket have auxiliary/control signals with matching MIL information.
Connector Name |
Connector Abbreviation |
Image |
Description |
BNC connectors |
BNC (0, 1, 2, and 3) |
![]() |
The BNC connectors are used to receive CVBS and/or Y/C video input. On the Matrox Morphis eDual/Dual Standard board, BNC 2 and BNC 3 can each be configured for trigger input through the use of jumpers. |
On Matrox Morphis Dual PC/104-Plus boards, the following connector on the HD-44 video input module (attached to the main board using the 40-pin ribbon cable) has auxiliary signals with matching MIL information.
Connector Name |
Connector Abbreviation |
Image |
Description |
Video input connector |
DBHD-44 (P104) |
![]() |
The video input connector is a high-density D-subminiature 44-pin female connector. It is used to receive trigger and video input signals. |
On Matrox Morphis Dual HDC boards, the following connector on the bracket of the main board has auxiliary/control signals with matching MIL information.
Connector Name |
Connector Abbreviation |
Image |
Description |
Video input connector |
DBHD-44 (HDC) |
![]() |
The video input connector is a high-density D-subminiature 44-pin female connector, used to receive trigger and video input signals. |
On Matrox Morphis Video and I/O modules of the Matrox Morphis eDual/Dual Standard, eQuad/Quad, and Dual HDC boards, the following connectors have auxiliary/control signals with matching MIL information.
Connector Name |
Connector Abbreviation |
Image |
Description |
External Video and I/O connector 0 |
DBHD-44 (VIOM) |
![]() |
External Video and I/O connector 0 is a high-density D-subminiature 44-pin female connector, used to receive video input and user input signals, and transmit user output and video test output signals. |
External I/O connector 1 |
DB-9 |
![]() |
External I/O connector 1 is a standard D-subminiature 9-pin female connector, used to receive acquisition trigger signals and connect to an RS-485 two-wire multi-drop network. |
The table below lists the auxiliary/control signals with their associated MIL information. Note that the MIL constants in this table are those to use with MIL 10 and later. If you are upgrading from a previous version of MIL, you should port your code using the conversion tables for the Matrox Morphis (MilMorphisIOConversionTable) in the MIL release notes.
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
Pin information | Connector: DBHD-44 (HDC) Pin: 6; Connector: BNC (2) Pin: 1; Connector: DBHD-44 (P104) Pin: 12; Connector: DB-9 Pin: 3+, 7- | ||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
Pin information | Connector: DBHD-44 (HDC) Pin: 24; Connector: BNC (3) Pin: 1; Connector: DB-9 Pin: 1+, 2-; Connector: DBHD-44 (P104) Pin: 35 | ||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
Pin information | Connector: DBHD-44 (HDC) Pin: 6; Connector: BNC (2) Pin: 1; Connector: DBHD-44 (P104) Pin: 12; Connector: DB-9 Pin: 3+, 7- | ||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
Pin information | Connector: DBHD-44 (HDC) Pin: 24; Connector: BNC (3) Pin: 1; Connector: DB-9 Pin: 1+, 2-; Connector: DBHD-44 (P104) Pin: 35 | ||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV3
2 |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() Shared with: M_DEV0, M_DEV1, M_DEV2
2 |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
Pin information | Connector: DBHD-44 (HDC) Pin: 6; Connector: BNC (2) Pin: 1; Connector: DBHD-44 (P104) Pin: 12; Connector: DB-9 Pin: 3+, 7- | ||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
Pin information | Connector: DBHD-44 (HDC) Pin: 24; Connector: BNC (3) Pin: 1; Connector: DB-9 Pin: 1+, 2-; Connector: DBHD-44 (P104) Pin: 35 | ||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO15; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO5; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO0; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO14; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO13; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO4; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO1; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO12; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO11; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO3; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO15; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO5; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO0; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO14; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO13; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO4; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO1; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO12; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO11; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO3; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO15; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO5; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO0; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO14; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO13; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO4; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO1; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO12; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO11; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO3; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO15; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
||
Hardware manual signal name | TTL_USER_IO_15 | ||
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
||
Hardware manual signal name | TTL_USER_IO_9 | ||
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
||
Hardware manual signal name | TTL_USER_IO_8 | ||
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO5; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
||
Hardware manual signal name | TTL_USER_IO_5 | ||
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
||
Hardware manual signal name | TTL_USER_IO_2 | ||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO0; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
||
Hardware manual signal name | TTL_USER_IO_0 | ||
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO14; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
||
Hardware manual signal name | TTL_USER_IO_14 | ||
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO13; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
||
Hardware manual signal name | TTL_USER_IO_13 | ||
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
||
Hardware manual signal name | TTL_USER_IO_10 | ||
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO4; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
||
Hardware manual signal name | TTL_USER_IO_4 | ||
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO1; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
||
Hardware manual signal name | TTL_USER_IO_1 | ||
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO12; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
||
Hardware manual signal name | TTL_USER_IO_12 | ||
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO11; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
||
Hardware manual signal name | TTL_USER_IO_11 | ||
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
||
Hardware manual signal name | TTL_USER_IO_7 | ||
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
||
Hardware manual signal name | TTL_USER_IO_6 | ||
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO3; | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
||
Hardware manual signal name | TTL_USER_IO_3 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
||
Hardware manual signal name | P0_TTL_TRIG_IN/P0_OPTO_TRIG_IN | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
||
Hardware manual signal name | P1_TTL_TRIG_IN/P1_OPTO_TRIG_IN |
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-44 (HDC) Pin: 6; Connector: BNC (2) Pin: 1; Connector: DBHD-44 (P104) Pin: 12; Connector: DB-9 Pin: 3+, 7- | |
Direction |
Input |
|
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
|
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
|
Pin information | Connector: DBHD-44 (HDC) Pin: 24; Connector: BNC (3) Pin: 1; Connector: DB-9 Pin: 1+, 2-; Connector: DBHD-44 (P104) Pin: 35 | |
Direction |
Input |
|
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
|
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO0; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
|
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO1; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
|
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
|
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO3; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
|
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO4; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
|
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO5; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
|
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO6; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
|
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO7; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
|
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
|
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
|
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO10; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
|
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO11; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
|
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO12; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
|
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO13; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
|
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO14; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
|
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO15; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-44 (HDC) Pin: 6; Connector: BNC (2) Pin: 1; Connector: DBHD-44 (P104) Pin: 12; Connector: DB-9 Pin: 3+, 7- | |
Direction |
Input |
|
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
|
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
|
Pin information | Connector: DBHD-44 (HDC) Pin: 24; Connector: BNC (3) Pin: 1; Connector: DB-9 Pin: 1+, 2-; Connector: DBHD-44 (P104) Pin: 35 | |
Direction |
Input |
|
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
|
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO0; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
|
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO1; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
|
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
|
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO3; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
|
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO4; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
|
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO5; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
|
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO6; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
|
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO7; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
|
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
|
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
|
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO10; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
|
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO11; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
|
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO12; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
|
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO13; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
|
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO14; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
|
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO15; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO0; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
|
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO1; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
|
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
|
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO3; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
|
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO4; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
|
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO5; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
|
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO6; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
|
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO7; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
|
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
|
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
|
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO10; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
|
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO11; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
|
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO12; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
|
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO13; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
|
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO14; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
|
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO15; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 0 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO0; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 12 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT0;
|
|
![]() ![]() |
TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 1 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO1; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 28 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT1;
|
|
![]() ![]() |
TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 2 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 9 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
|
|
![]() ![]() |
TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 3 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO3; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 39 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
|
|
![]() ![]() |
TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 4 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO4; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 24 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
|
|
![]() ![]() |
TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 5 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO5; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 8 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT5;
|
|
![]() ![]() |
TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 6 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO6; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 38 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT6;
|
|
![]() ![]() |
TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 7 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO7; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 37 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT7;
|
|
![]() ![]() |
TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 8 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 7 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT8;
|
|
![]() ![]() |
TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 9 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 6 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT9;
|
|
![]() ![]() |
TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 10 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO10; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 22 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT10;
|
|
![]() ![]() |
TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 11 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO11; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 32 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT11;
|
|
![]() ![]() |
TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 12 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO12; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 31 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT12;
|
|
![]() ![]() |
TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 13 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO13; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 21 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT13;
|
|
![]() ![]() |
TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 14 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO14; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 16 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT14;
|
|
![]() ![]() |
TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (summarize)TTL auxiliary signal 15 (input/output), shared between all acquisition paths for user input or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO15; | |
Pin information | Connector: DBHD-44 (VIOM) Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT15;
|
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information |
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards, Matrox Morphis Dual HDC boards, or the Matrox Morphis Dual PC/104-Plus boards. This is an opto-isolated signal only when used with the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 0, which supports: trigger input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-44 (HDC) Pin: 6; Connector: BNC (2) Pin: 1; Connector: DBHD-44 (P104) Pin: 12; Connector: DB-9 Pin: 3+, 7- | |
Direction |
Input |
|
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 0 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV0 1 ;
|
|
![]() ![]() |
TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. This is a TTL signal only when used with the Matrox Morphis eDual/Dual Standard boards or the Matrox Morphis Dual HDC boards. This is an opto-isolated signal only when used with the Matrox Morphis Dual PC/104-Plus boards or the Matrox Morphis Video and I/O modules. Note that, triggered grabs are not supported on Matrox Morphis eQuad/Quad. (summarize)TTL/opto-isolated auxiliary signal (input), for acquisition path 1, which supports: trigger input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO16 3 ;
Digitizer device #: M_DEV1;
|
|
Pin information | Connector: DBHD-44 (HDC) Pin: 24; Connector: BNC (3) Pin: 1; Connector: DB-9 Pin: 1+, 2-; Connector: DBHD-44 (P104) Pin: 35 | |
Direction |
Input |
|
Trigger information |
Trigger
controller selected automatically.
Trigger for acq path 1 1 .
M_HARDWARE_PORT0;
Digitizer device #: M_DEV1 1 ;
|
1 Triggered grabs are not supported on Matrox Morphis eQuad/Quad.
2 Devices M_DEV2 and M_DEV3 are only supported on Matrox Morphis eQuad/Quad.
3 The status of input signals exclusively dedicated for triggers cannot be inquired using MsysInquire() with M_IO_STATUS. If an inquire attempt is made, an error will be generated.