MblobAllocResult

See also

User Guide:

Steps to performing blob analysis

Reference:

MblobFree MblobGetLabel MblobGetResult MsysAlloc

Availability

Not available in MIL-Lite

Available in MIL

Available on Windows

Available on Linux

Not supported on:

Not supported on Matrox Indio (Update 53 or Update 68) (w)

Not supported on Matrox Concord PoE with ToE (Update 82) (z)

Fully supported on:

Fully supported on Host system (a)

Fully supported on Matrox GigE Vision driver (MIL 10, Update 25, Update 54, or Update 85)* (c)

Fully supported on Matrox Morphis (g)

Fully supported on Matrox Morphis QxT (h)

Fully supported on Matrox Orion HD (i)

Fully supported on Matrox Radient eCL (j)

Fully supported on Matrox Radient eV-CXP (MIL 10 or Update 29)* (k)

Fully supported on Matrox Solios eA/XA (l)

Fully supported on Matrox Solios ecl/xcl/ev-cl (m)

Fully supported on Matrox USB3 Vision driver (Update 19) (o)

Fully supported on Matrox RadientPro-CL (Update 7) (p)

Fully supported on Matrox Radient eV-CL (Update 27 or 74) (r)

Fully supported on Matrox Iris GTR (Update 28 or Update 68) (t)

Fully supported on Matrox Clarity UHD (Update 36 or 76) (u)

Fully supported on Matrox GenTL driver (Update 34) (v)

Fully supported on Matrox Rapixo CXP (Update 75 or Update 84) (y)

Fully supported on Matrox Rapixo CL Pro (Update 96) (aa)

* Refer to the MIL system-specific information
in the MIL Reference for the minimum update required.

For any information regarding a MIL system added during a MIL Update, see the MIL system’s release note

Available on Non-Matrox computer

Available on Matrox 4Sight-X

Available on Matrox 4Sight GP/GPm

Available on Matrox Supersight

Function map

Examples

Function Map

- SysId

Table:

For specifying the system

Compilation information

Synopsis

Allocate a Blob Analysis result buffer.

Syntax

MIL_ID MblobAllocResult(

MIL_ID SysId,	//in
MIL_INT64 ResultType,	//in
MIL_INT64 ControlFlag,	//in
MIL_ID *ResultBlobIdPtr	//out

)

Description

This function allocates a result buffer that can store blob analysis results.

Each blob creates a separate result entry in the Blob Analysis result buffer. You can retrieve blob analysis results from a result buffer, using MblobGetResult(). To determine the label value of a blob at a sepcified position, you can call MblobGetLabel(). When the result buffer is no longer required, release it, using MblobFree().

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.

Parameters

This function is not supported on the selected boards.

This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.

Parameters

SysId INQ

Specifies the system on which to allocate the result buffer.

This parameter should be set to one of the following values:

For specifying the system
Value	Description
M_DEFAULT_HOST	Specifies the default Host system of the current MIL application.
MIL system identifier	Specifies a valid system identifier, previously allocated using MsysAlloc().

ResultType

Reserved for future expansion. This parameter must be set to M_DEFAULT.

ControlFlag

Reserved for future expansion. This parameter must be set to M_DEFAULT.

ResultBlobIdPtr

Specifies the address of the variable in which to write the identifier of the Blob Analysis result buffer. If allocation fails, M_NULL is returned. Since the MblobAllocResult() function also returns the Blob Analysis result buffer's identifier, you can set this parameter to M_NULL.

Return value

The returned value is the result buffer's identifier if the allocation is successful. If allocation fails, M_NULL is returned.

Remark

The prototypes of functions in the Mblob module changed as of MIL 10 PP2. For C applications, by default the original prototypes are used to ensure backward-compatibility. To use the updated prototypes, add #define M_USE_OLD_MBLOB_API_IN_C 0 before including mil.h. For information about the original API for the Mblob module refer to the MIL 10 PP1 documentation, available online to registered users at https://www.matrox.com/imaging/en/products/software/mil/documentation/.

Compilation information

Header	Include mil.h.
Library	Use mil.lib; milblob.lib.
DLL	Requires mil.dll; milblob.dll.