McolAllocResult

See also

User Guide:

Color matching

Reference:

McolFree McolGetResult McolMatch MsysAlloc

Availability

Not available in MIL-Lite

Available in MIL

Available on Windows

Available on Linux

Not supported on:

Not supported on Matrox Indio (Update 53 or Update 68) (w)

Not supported on Matrox Concord PoE with ToE (Update 82) (z)

Fully supported on:

Fully supported on Host system (a)

Fully supported on Matrox GigE Vision driver (MIL 10, Update 25, Update 54, or Update 85)* (c)

Fully supported on Matrox Morphis (g)

Fully supported on Matrox Morphis QxT (h)

Fully supported on Matrox Orion HD (i)

Fully supported on Matrox Radient eCL (j)

Fully supported on Matrox Radient eV-CXP (MIL 10 or Update 29)* (k)

Fully supported on Matrox Solios eA/XA (l)

Fully supported on Matrox Solios ecl/xcl/ev-cl (m)

Fully supported on Matrox USB3 Vision driver (Update 19) (o)

Fully supported on Matrox RadientPro-CL (Update 7) (p)

Fully supported on Matrox Radient eV-CL (Update 27 or 74) (r)

Fully supported on Matrox Iris GTR (Update 28 or Update 68) (t)

Fully supported on Matrox Clarity UHD (Update 36 or 76) (u)

Fully supported on Matrox GenTL driver (Update 34) (v)

Fully supported on Matrox Rapixo CXP (Update 75 or Update 84) (y)

Fully supported on Matrox Rapixo CL Pro (Update 96) (aa)

* Refer to the MIL system-specific information
in the MIL Reference for the minimum update required.

For any information regarding a MIL system added during a MIL Update, see the MIL system’s release note

Available on Non-Matrox computer

Available on Matrox 4Sight-X

Available on Matrox 4Sight GP/GPm

Available on Matrox Supersight

Function map

Examples

foodinspectioncereal.cpp
foodinspectionmango.cpp
mcol.cpp
mcol.cs
mcol.vb
productidentificationoasis.cpp
utilmatchcolormap.cpp

Function Map

- SystemId

Table:

For specifying the system identifier

- ResultType

Table:

For specifying the type of result buffer to allocate

- ControlFlag

- ResultIdPtr

Return value

Compilation information

Synopsis

Allocate a color matching result buffer.

Syntax

MIL_ID McolAllocResult(

MIL_ID SystemId,	//in
MIL_INT64 ResultType,	//in
MIL_INT64 ControlFlag,	//in
MIL_ID *ResultIdPtr	//out

)

Description

This function allocates a result buffer, on the specified system, to store the results from an McolMatch() operation. You can read the results from the result buffer, using McolGetResult(). When the result buffer is no longer required, release its memory, using McolFree().

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.

Parameters

This function is not supported on the selected boards.

This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.

Parameters

SystemId INQ

Specifies the system on which to allocate the result buffer. This parameter should be set to one of the following values:

For specifying the system identifier
Value	Description
M_DEFAULT_HOST	Specifies the default Host system of the current MIL application.
MIL system identifier	Specifies a valid system identifier, previously allocated using MsysAlloc().

ResultType

Specifies the type of result buffer to allocate. This parameter can be set to one of the following values:

For specifying the type of result buffer to allocate
Value	Description
M_DEFAULT	Same as M_COLOR_MATCHING_RESULT.
M_COLOR_MATCHING_RESULT	Specifies to allocate a result buffer for color matching results.

ControlFlag

Reserved for future expansion and must be set to M_DEFAULT.

ResultIdPtr

Specifies the address of the variable in which to write the color matching result identifier. If allocation fails, M_NULL is returned as the identifier. Since McolAllocResult() also returns the color matching result identifier, you can set this parameter to M_NULL.

Return value

The returned value is the result buffer identifier if the allocation is successful. If allocation fails, M_NULL is returned.

Compilation information

Header	Include mil.h.
Library	Use mil.lib; milcolor.lib.
DLL	Requires mil.dll; milcolor.dll.