McolStream

MIL_TEXT_PTR MemPtrOrFileName,	//in-out
MIL_ID SysId,	//in
MIL_INT64 Operation,	//in
MIL_INT64 StreamType,	//in
MIL_DOUBLE Version,	//in
MIL_INT64 ControlFlag,	//in
MIL_ID *ContextColIdPtr,	//in-out
MIL_INT *SizeByteVarPtr	//out

)

Description

This function can load, restore, or save a MIL color matching or relative color calibration context from/to a file or memory stream.

To inquire the number of bytes necessary to save the context, you should first call this function (McolStream()) with M_INQUIRE_SIZE_BYTE.

The content saved to memory stream is equivalent to the content saved to file. This function is equivalent to a file saved using McolSave().

You can use this and other MIL stream functions, for example, to save all required MIL objects, as well as any other custom data, for your application to a memory stream. Once in a memory stream, you can write the stream to a single file or transfer it over a network. You are responsible for concatenating the streams and for saving the stream to file. All information about the previously allocated context (and the color-samples therein) is saved. However, preprocessing information is not saved.

All of the context's settings (and color-samples) that were in effect when the context was saved will be restored. A loaded or restored context is not preprocessed; therefore, you must call McolPreprocess() before performing McolMatch() (color matching) or McolTransform() (relative color calibration).

Using McolStream(), you can choose to save a backward-compatible version of the context, which will work using an older version of MIL which supports the context. For example, if you allocate a color matching context using MIL 10.0 and save it to version 9.0 PP1, you can restore this context on a computer where MIL 9.0 PP1 is installed. However, all settings and features unique to the higher version will be ignored when restored using the lower version. Settings that do not exist in the lower version will be filled with default values when the context is loaded or restored.

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.

Parameters

This function is not supported on the selected boards.

This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.

Parameters

MemPtrOrFileName

Accepts the address of one of the following (see the Parameter associations section for specifics on which is expected):

MIL_TEXT_PTR [optionally, in C++: a reference to a MIL_STRING]
Optionally, in C++: a reference to a std::vector of type MIL_UINT8

Specifies the file or memory stream.

See the Parameter associations section for possible values that can be returned/specified.

SysId

Specifies the system on which to restore the context.

See the Parameter associations section for possible values that can be specified.

Operation

Specifies the operation to perform.

See the Parameter associations section for possible values that can be specified.

StreamType

Specifies the type of stream in which to store/from which to restore the context. This parameter must be set to one of the following values:

For the type of stream
Value	Description
M_FILE	Specifies a file stream.
M_MEMORY	Specifies a memory stream. You are responsible for allocating a block of memory for the stream. (summarize) Specifies a memory stream. (more details...)

Version

Specifies the MIL version of the context.

See the Parameter associations section for possible values that can be specified.

ControlFlag

Reserved for future expansion and must be set to M_DEFAULT.

ContextColIdPtr

Specifies the address of the variable in which to write or from which to read the identifier of the context.

See the Parameter associations section for possible values that can be returned/specified.

SizeByteVarPtr

Specifies the address of the variable in which to write the size of the context, in bytes.

If the size is not required, you can set this parameter to M_NULL.

The size of the context varies depending on the MIL version that you specify.

Parameter associations

The table below lists possible values for the MemPtrOrFileName, SysId, Operation, Version, and ContextColIdPtr parameters.

For performing the stream operation.

For performing the stream operation.
Operation			Description
	MemPtrOrFileName - Possible values passed or returned
	SysId
	Version
	ContextColIdPtr - Possible values passed or returned
M_INQUIRE_SIZE_BYTE			Inquires the number of bytes required to save a color matching or relative color calibration context to memory stream. This operation is not supported when the StreamType parameter is set to M_FILE. (summarize) Inquires the number of bytes required to save a color matching or relative color calibration context to memory stream. (more details...)
	MemPtrOrFileName		This parameter must be set to M_NULL. (summarize) This parameter must be set to M_NULL. (more details...)
	SysId		This parameter must be set to M_NULL. (summarize) This parameter must be set to M_NULL. (more details...)
	Version		Specifies the MIL version with which the color matching or relative color calibration context must be compatible when saved. The size of a color matching or relative color calibration context might differ from one MIL version to another. (summarize) Specifies the MIL version with which the color matching or relative color calibration context must be compatible when saved. (more details...)
		M_DEFAULT	Specifies the current version of MIL.
		M_PROC_VERSION_90_PP1	Specifies the version as being MIL 9.0 Processing Pack 1. This MIL version is not supported with a relative color calibration context. (summarize) Specifies the version as being MIL 9.0 Processing Pack 1. (more details...)
		M_PROC_VERSION_90_PP2	Specifies the version as being MIL 9.0 Processing Pack 2. This MIL version is not supported with a relative color calibration context. (summarize) Specifies the version as being MIL 9.0 Processing Pack 2. (more details...)
		M_PROC_VERSION_100	Specifies the version as being MIL 10.0. This MIL version is not supported with a relative color calibration context. (summarize) Specifies the version as being MIL 10.0. (more details...)
		M_PROC_VERSION_100_PP1	Specifies the version as being MIL 10.0 Processing Pack 1.
		M_PROC_VERSION_100_PP2	Specifies the version as being MIL 10.0 Processing Pack 2.
		M_PROC_VERSION_100_PP3	Specifies the version as being MIL 10.0 Processing Pack 3.
		M_PROC_VERSION_100_SP4	Specifies the version as being MIL 10.0 Service Pack 4.
	ContextColIdPtr		Specifies the address of the variable containing the identifier of the color matching or relative color calibration context. (summarize) Specifies the address of the variable containing the identifier of the color matching or relative color calibration context. (more details...)
M_LOAD			Loads the content of a specified file or memory stream into a previously allocated color matching or relative color calibration context. (summarize) Loads the content of a specified file or memory stream into a previously allocated color matching or relative color calibration context. (more details...)
	MemPtrOrFileName		Specifies the file or memory stream from which to load the context. (summarize) Specifies the file or memory stream from which to load the context. (more details...)
		M_INTERACTIVE	[This is only applicable to Windows] Opens a dialog box from which you can interactively specify the drive, directory, and name of the file, when the StreamType parameter is set to M_FILE.
		MIL_TEXT("FileName") ¹	Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile"), when the StreamType parameter is set to M_FILE. Color matching contexts typically have an MCOL file extension. Relative color calibration context typically have an MCCC file extension. The function handles (internally) the opening and closing of the file. To specify a file on a remote computer (under Distributed MIL), prefix the specified file name string with "remote:///" (for example, "remote:///C:\mydirectory\myfile"). (summarize) Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile"), when the StreamType parameter is set to M_FILE. (more details...)
		MemPtr	Specifies the address of the block of memory, when the StreamType parameter is set to M_MEMORY. The block of memory should be of type MIL_UINT8. The specified address must correspond to the first memory address in which the object is located, and the block of memory must contain the entire object. Note that when using a C compiler (not a C++ or other compiler), you must cast the MIL_UINT8 pointer to a MIL_TEXT_PTR. (summarize) Specifies the address of the block of memory, when the StreamType parameter is set to M_MEMORY. (more details...)
	SysId		This parameter must be set to M_NULL. (summarize) This parameter must be set to M_NULL. (more details...)
	Version		This parameter must be set to M_DEFAULT. (summarize) This parameter must be set to M_DEFAULT. (more details...)
	ContextColIdPtr		Specifies the address of the variable containing the identifier of the color matching or relative color calibration context. All previous settings are overwritten with those of the loaded context, or are set to the default value if the settings didn't exist in the version of MIL from which the context is being loaded. (summarize) Specifies the address of the variable containing the identifier of the color matching or relative color calibration context. (more details...)
M_RESTORE			Restores a color matching or relative color calibration context from a file or memory stream and assigns it a MIL identifier. (summarize) Restores a color matching or relative color calibration context from a file or memory stream and assigns it a MIL identifier. (more details...)
	MemPtrOrFileName		Specifies the file or memory stream from which to restore the context. (summarize) Specifies the file or memory stream from which to restore the context. (more details...)
		M_INTERACTIVE	[This is only applicable to Windows] Opens a dialog box from which you can interactively specify the drive, directory, and name of the file, when the StreamType parameter is set to M_FILE.
		MIL_TEXT("FileName") ¹	Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile"), when the StreamType parameter is set to M_FILE. Color matching contexts typically have an MCOL file extension. Relative color calibration context typically have an MCCC file extension. The function handles (internally) the opening and closing of the file. To specify a file on a remote computer (under Distributed MIL), prefix the specified file name string with "remote:///" (for example, "remote:///C:\mydirectory\myfile"). (summarize) Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile"), when the StreamType parameter is set to M_FILE. (more details...)
		MemPtr	Specifies the address of the block of memory, when the StreamType parameter is set to M_MEMORY. The block of memory should be of type MIL_UINT8. The specified address must correspond to the first memory address in which the object is located, and the block of memory must contain the entire object. Note that when using a C compiler (not a C++ or other compiler), you must cast the MIL_UINT8 pointer to a MIL_TEXT_PTR. (summarize) Specifies the address of the block of memory, when the StreamType parameter is set to M_MEMORY. (more details...)
	SysId		Specifies the system on which to allocate the color matching or relative color calibration context. (summarize) Specifies the system on which to allocate the color matching or relative color calibration context. (more details...)
		M_DEFAULT_HOST	Specifies the default Host system of the current MIL application.
		MIL system identifier	Specifies a valid system identifier, previously allocated using MsysAlloc().
	Version		This parameter must be set to M_DEFAULT. (summarize) This parameter must be set to M_DEFAULT. (more details...)
	ContextColIdPtr		Specifies the address of the variable in which to write the identifier of the color matching or relative color calibration context. If the operation is not successful, M_NULL is returned. (summarize) Specifies the address of the variable in which to write the identifier of the color matching or relative color calibration context. (more details...)
M_SAVE			Saves a color matching or relative color calibration context to a specified file or memory stream. (summarize) Saves a color matching or relative color calibration context to a specified file or memory stream. (more details...)
	MemPtrOrFileName		Specifies the file or memory stream. (summarize) Specifies the file or memory stream. (more details...)
		M_INTERACTIVE	[This is only applicable to Windows] Opens a dialog box from which you can interactively specify the drive, directory, and name of the file, when the StreamType parameter is set to M_FILE.
		MIL_TEXT("FileName") ¹	Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile"), when the StreamType parameter is set to M_FILE. For easier use with other Matrox Imaging software products, when saving a color matching context to a file, use the MCOL file extension. When saving a relative color calibration context to a file, use the MCCC file extension. The function handles (internally) the opening and closing of the file. If the file already exists, it will be overwritten. To specify a file on a remote computer (under Distributed MIL), prefix the specified file name string with "remote:///" (for example, "remote:///C:\mydirectory\myfile"). (summarize) Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile"), when the StreamType parameter is set to M_FILE. (more details...)
		MemPtr	Specifies the address of the block of memory, when the StreamType parameter is set to M_MEMORY. The block of memory should be of type MIL_UINT8. The specified address must correspond to the first memory address in which to write, and the block of memory must be large enough to stream the entire object. To determine the required size, call this function with M_INQUIRE_SIZE_BYTE. Note that when using a C compiler (not a C++ or other compiler), you must cast the MIL_UINT8 pointer to a MIL_TEXT_PTR. (summarize) Specifies the address of the block of memory, when the StreamType parameter is set to M_MEMORY. (more details...)
	SysId		This parameter must be set to M_NULL. (summarize) This parameter must be set to M_NULL. (more details...)
	Version		Specifies the MIL version with which the color matching or relative color calibration context must be compatible when saved. Note that the color matching or relative color calibration context can only be up to one major release older (MIL 9.0) than the current version. (summarize) Specifies the MIL version with which the color matching or relative color calibration context must be compatible when saved. (more details...)
		M_DEFAULT	Specifies the current version of MIL.
		M_PROC_VERSION_90_PP1	Sets the version as being MIL 9.0 Processing Pack 1. This MIL version is not supported with a relative color calibration context. (summarize) Sets the version as being MIL 9.0 Processing Pack 1. (more details...)
		M_PROC_VERSION_90_PP2	Sets the version as being MIL 9.0 Processing Pack 2. This MIL version is not supported with a relative color calibration context. (summarize) Sets the version as being MIL 9.0 Processing Pack 2. (more details...)
		M_PROC_VERSION_100	Sets the version as being MIL 10.0. This MIL version is not supported with a relative color calibration context. (summarize) Sets the version as being MIL 10.0. (more details...)
		M_PROC_VERSION_100_PP1	Sets the version as being MIL 10.0 Processing Pack 1.
		M_PROC_VERSION_100_PP2	Specifies the version as being MIL 10.0 Processing Pack 2.
		M_PROC_VERSION_100_PP3	Specifies the version as being MIL 10.0 Processing Pack 3.
	ContextColIdPtr		Specifies the address of the variable containing the identifier of the color matching or relative color calibration context to save. (summarize) Specifies the address of the variable containing the identifier of the color matching or relative color calibration context to save. (more details...)

¹ If you are passing the value in a variable, don't enclose it in MIL_TEXT().

Compilation information

Header	Include mil.h.
Library	Use mil.lib; milcolor.lib.
DLL	Requires mil.dll; milcolor.dll.