MimThick

See also

User Guide:

Custom morphological operations

Reference:

MbufInquire

Availability

Not available in MIL-Lite

Available in MIL

Available on Windows

Available on Linux

Not supported on:

Not supported on Matrox Indio (Update 53 or Update 68) (w)

Not supported on Matrox Concord PoE with ToE (Update 82) (z)

Fully supported on:

Fully supported on Host system (a)

Fully supported on Matrox GigE Vision driver (MIL 10, Update 25, Update 54, or Update 85)* (c)

Fully supported on Matrox Morphis (g)

Fully supported on Matrox Morphis QxT (h)

Fully supported on Matrox Orion HD (i)

Fully supported on Matrox Radient eCL (j)

Fully supported on Matrox Radient eV-CXP (MIL 10 or Update 29)* (k)

Fully supported on Matrox Solios eA/XA (l)

Fully supported on Matrox Solios ecl/xcl/ev-cl (m)

Fully supported on Matrox USB3 Vision driver (Update 19) (o)

Fully supported on Matrox RadientPro-CL (Update 7) (p)

Fully supported on Matrox Radient eV-CL (Update 27 or 74) (r)

Fully supported on Matrox Iris GTR (Update 28 or Update 68) (t)

Fully supported on Matrox Clarity UHD (Update 36 or 76) (u)

Fully supported on Matrox GenTL driver (Update 34) (v)

Fully supported on Matrox Rapixo CXP (Update 75 or Update 84) (y)

Fully supported on Matrox Rapixo CL Pro (Update 96) (aa)

* Refer to the MIL system-specific information
in the MIL Reference for the minimum update required.

For any information regarding a MIL system added during a MIL Update, see the MIL system’s release note

Available on Non-Matrox computer

Available on Matrox 4Sight-X

Available on Matrox 4Sight GP/GPm

Available on Matrox Supersight

Function map

Examples

Function Map

- NbIteration

Table:

For specifying the number of times to iterate the operation

- ProcMode

Table:

For specifying the processing mode to use

Compilation information

Synopsis

Perform a binary or grayscale thickening operation on an image.

Syntax

void MimThick(

MIL_ID SrcImageBufId,	//in
MIL_ID DstImageBufId,	//in
MIL_INT NbIteration,	//in
MIL_INT64 ProcMode	//in

)

Description

This function performs a binary or grayscale thickening on the specified source image for the specified number of iterations.

The overscan pixels are automatically set to the lowest possible buffer value, which will produce the most accurate possible results for the image border pixels.

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.

Parameters

This function is not supported on the selected boards.

This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.

Parameters

SrcImageBufId

Specifies the identifier of the data source of the operation. This parameter must be given an image buffer identifier.

This image buffer must not have a region of interest (ROI) associated with it. Using an image buffer with an ROI will cause an error.

DstImageBufId

Specifies the identifier of the destination of the resulting image. This parameter must be given an image buffer identifier.

This image buffer must not have a region of interest (ROI) associated with it. Using an image buffer with an ROI will cause an error.

NbIteration

Specifies the number of times to iterate the operation. This parameter must be set to one of the values below.

For specifying the number of times to iterate the operation
Value	Description
M_TO_IDEMPOTENCE	Specifies the operation will iterate until idempotence is reached.
Value >= 0	Specifies the number of iterations. If this parameter is set to 0, and ProcMode is set to M_BINARY, the source image is binarized and the result is copied into the destination image buffer. If this parameter is set to 0, and ProcMode is set to M_GRAYSCALE, the source image is copied into the destination image buffer. (summarize) Specifies the number of iterations. (more details...)

ProcMode

Specifies the processing mode to use. This parameter must be set to one of the values below.

For specifying the processing mode to use
Value	Description
M_BINARY	Treats non-zero pixels as ones (1) during processing. The resulting non-zero pixels will have all bits set to one. (summarize) Treats non-zero pixels as ones (1) during processing. (more details...)
M_GRAYSCALE	Uses the source image's gray values for processing. The resulting pixels will be grayscale. (summarize) Uses the source image's gray values for processing. (more details...)

Compilation information

Header	Include mil.h.
Library	Use mil.lib; milim.lib.
DLL	Requires mil.dll; milim.dll.