MpatSave

See also

User Guide:

Steps to performing a pattern search

Reference:

MpatRestore MpatStream

Availability

Not available in MIL-Lite

Available in MIL

Available on Windows

Available on Linux with restrictions

Not supported on:

Not supported on Matrox Indio (Update 53 or Update 68) (w)

Not supported on Matrox Concord PoE with ToE (Update 82) (z)

Fully supported on:

Fully supported on Host system (a)

Fully supported on Matrox GigE Vision driver (MIL 10, Update 25, Update 54, or Update 85)* (c)

Fully supported on Matrox Morphis (g)

Fully supported on Matrox Morphis QxT (h)

Fully supported on Matrox Orion HD (i)

Fully supported on Matrox Radient eCL (j)

Fully supported on Matrox Radient eV-CXP (MIL 10 or Update 29)* (k)

Fully supported on Matrox Solios eA/XA (l)

Fully supported on Matrox Solios ecl/xcl/ev-cl (m)

Fully supported on Matrox USB3 Vision driver (Update 19) (o)

Fully supported on Matrox RadientPro-CL (Update 7) (p)

Fully supported on Matrox Radient eV-CL (Update 27 or 74) (r)

Fully supported on Matrox Iris GTR (Update 28 or Update 68) (t)

Fully supported on Matrox Clarity UHD (Update 36 or 76) (u)

Fully supported on Matrox GenTL driver (Update 34) (v)

Fully supported on Matrox Rapixo CXP (Update 75 or Update 84) (y)

Fully supported on Matrox Rapixo CL Pro (Update 96) (aa)

* Refer to the MIL system-specific information
in the MIL Reference for the minimum update required.

For any information regarding a MIL system added during a MIL Update, see the MIL system’s release note

Available on Non-Matrox computer

Available on Matrox 4Sight-X

Available on Matrox 4Sight GP/GPm

Available on Matrox Supersight

Function map

Examples

None.

Function Map

- FileName

Table:

For specifying the file name and path

- ContextPatId

- ControlFlag

Remarks

Compilation information

Synopsis

Save a Pattern Matching context to disk.

Syntax

void MpatSave(

MIL_CONST_TEXT_PTR FileName,	//in
MIL_ID ContextPatId,	//in
MIL_INT64 ControlFlag	//in

)

Description

This function saves all the information about the previously allocated Pattern Matching context to disk, including all of the Pattern Matching context's current search parameters values. Later, this information can be reloaded, using MpatRestore() or MpatStream().

All of the Pattern Matching context settings that are enabled or were in effect are saved. A loaded or restored Pattern Matching context is not preprocessed.

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.

Parameters

This function is not supported on the selected boards.

This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.

Parameters

FileName

Specifies the name and path of the file in which to save the model. It is recommended that you use the MPAT file extension for easier use with other Matrox Imaging software products. The function handles (internally) the opening and closing of the file. If the file already exists, it will be overwritten.

This parameter can be set to one of the following values:

For specifying the file name and path
Value	Description
M_INTERACTIVE	[This is only applicable to Windows] Opens the File Save As dialog box from which you can interactively specify the drive, directory, and name of the file.
MIL_TEXT("FileName") ¹	Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile"). Typically, Pattern Matching context files have an MPAT extension. To specify a file on a remote computer (under Distributed MIL), prefix the specified file name string with "remote:///" (for example, "remote:///C:\mydirectory\myfile"). (summarize) Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile"). (more details...)

¹ If you are passing the value in a variable, don't enclose it in MIL_TEXT().

ContextPatId

Specifies the identifier of the Pattern Matching context to save.

ControlFlag

Reserved for future expansion. This parameter must be set to M_DEFAULT.

Remark

The prototypes of functions in the Mpat module changed as of MIL 10 PP2. For C applications, by default the original prototypes are used to ensure backward-compatibility. To use the updated prototypes, add #define M_USE_OLD_MPAT_API_IN_C 0 before including mil.h. For information about the original API for the Mpat module refer to the MIL 10 PP1 documentation, available online to registered users at https://www.matrox.com/imaging/en/products/software/mil/documentation/.

Compilation information

Header	Include mil.h.
Library	Use mil.lib; milpat.lib.
DLL	Requires mil.dll; milpat.dll.