Allocating independent MIL digitizers on Matrox Radient eV-CXP

You can allocate up to four independent MIL digitizers on your Matrox Radient eV-CXP. Independent digitizers have different device numbers and use different acquisition paths.

When connecting a video source with multiple connectors, the master connection determines which device number should be used when allocating your digitizer. For example, if the master connector is plugged into CXP 0, use M_DEV0 to allocate the digitizer. If, however, the master connector is plugged into CXP 3, use M_DEV3 to allocate the digitizer. The other connectors for the same video source (called extension connectors) combine with the master connection to form a CXP link.

The following diagram depicts two CXP links, each with a master connection and an extension connection. In this example, video source 1 should be allocated using M_DEV0, while video source 2 should be allocated using M_DEV1.