| Customize Help
| Save Settings

MimTransform


Function Map
Syntax
Description
Parameters
- SrcImageRBufId
- SrcImageIBufId
- DstImageRBufId
- DstImageIBufId
- TransformType
- ControlFlag
Parameter Associations
Table: For selecting the transformation type.
+ combination: For the ControlFlag parameter
+ combination: For M_MAGNITUDE
+ combination: For specifying the transform characteristics
Compilation information
Synopsis
Perform a Fast Fourier transform (FFT), a Discrete Cosine transform (DCT), or a polar-cartesian coordinates transformation.
Syntax
void MimTransform(
MIL_ID SrcImageRBufId, //in
MIL_ID SrcImageIBufId, //in
MIL_ID DstImageRBufId, //in
MIL_ID DstImageIBufId, //in
MIL_INT64 TransformType, //in
MIL_INT64 ControlFlag //in
)
Description

This function performs a forward or reverse FFT or DCT transformation on an image. It also perfoms a cartesian-to-polar or polar-to-cartesian point-to-point coordinates transformation.

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.
Parameters
This function is not supported on the selected boards.
This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.
Parameters
SrcImageRBufId

Specifies the identifier of the source buffer for the real component of the image.

See the Parameter associations section for possible values that can be specified.

SrcImageIBufId

Specifies the identifier of the source buffer for the imaginary component of the image.

See the Parameter associations section for possible values that can be specified.

DstImageRBufId

Specifies the identifier of the destination buffer for the real component of the image.

This parameter can be set to M_NULL. See the parameter association table for more details.

See the Parameter associations section for possible values that can be specified.

DstImageIBufId

Specifies the identifier of the destination buffer for the imaginary component of the image.

This parameter can be set to M_NULL. See the parameter association table for more details.

See the Parameter associations section for possible values that can be specified.

TransformType

Specifies the type of transform to perform on the image.

See the Parameter associations section for possible values that can be specified.

ControlFlag

Specifies if the transform is a forward transform or a reverse transform.

See the Parameter associations section for possible values that can be specified.

Parameter associations

The table below lists possible values for the SrcImageRBufId, SrcImageIBufId, DstImageRBufId, DstImageIBufId, TransformType, and ControlFlag parameters.

function map For selecting the transformation type.
Click to summarizeTransformType Description MIL system-specific
tooltip (‡)
ControlFlag
SrcImageRBufId
SrcImageIBufId
DstImageRBufId
DstImageIBufId
Click to summarize M_DCT8X8

Performs a discrete cosine transform on each 8x8 pixel block in the image.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_DEFAULT

Same as M_FORWARD.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_FORWARD +

Performs a forward transform on the image.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageRBufId

Specifies the identifier of the source buffer for the real component of the image in the spatial domain.

The width and height of the source buffer must be a multiple of 8.

This image must not have a region of interest (ROI) associated with it. Using an image with an ROI will cause an error.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 8-bit signed/unsigned image buffer ID

Performs calculations in fixed-point format and returns to the destinations in 23.9 fixed point format.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 16-bit signed/unsigned image buffer ID

Performs calculations in fixed-point format and returns to the destinations in 25.7 fixed point format.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 32-bit signed image buffer ID

Conserves the fixed point format between the destination buffer and the source buffer.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Floating-point image buffer ID

Specifies that processing will be performed in floating-point arithmetic. The destination buffer should also be a floating-point buffer.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageIBufId

Specifies the identifier of the source buffer for the imaginary component of the image in the spatial domain.

This buffer must be of the same type and pixel depth, and have the same dimensions and limitations as the buffer specified for SrcImageRBufId.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_NULL

Specifies that a faster version of the forward transform will be performed.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Image buffer ID

Specifies the identifier of the source buffer.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageRBufId

Specifies the identifier of the destination buffer for the real component of the image in the frequency domain. If SrcImageRBufId is an integer buffer, this must be a 32-bit signed integer buffer. If SrcImageRBufId is a floating-point buffer, this must also be a floating-point buffer.

The width and height of the destination buffer should be a multiple of 8.

This image must not have a region of interest (ROI) associated with it. Using an image with an ROI will cause an error.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageIBufId

Specifies the identifier of the destination buffer for the imaginary component of the image in the frequency domain.

This buffer must be of the same type and pixel depth, and have the same dimensions and limitations as the buffer specified for DstImageRBufId.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_REVERSE +

Performs a reverse transform on the image.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageRBufId

Specifies the identifier of the source buffer for the real component of the image in the frequency domain. This must be a 32-bit integer buffer or a floating-point buffer.

The width and height of the source buffer must be a multiple of 8.

This image must not have a region of interest (ROI) associated with it. Using an image with an ROI will cause an error.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageIBufId

Specifies the identifier of the source buffer for the imaginary component of the image in the frequency domain.

This buffer must be of the same type and pixel depth, and have the same dimensions and limitations as the buffer specified for SrcImageRBufId.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_NULL

Specifies that a faster version of the forward transform will be performed.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Image buffer ID

Performs calculations in fixed-point format and returns to the destinations in fixed point format.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageRBufId

Specifies the identifier of the destination buffer for the real component of the image in the spatial domain.

The width and height of the destination buffer should be a multiple of 8.

This image must not have a region of interest (ROI) associated with it. Using an image with an ROI will cause an error.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 8-bit signed/unsigned image buffer ID

The format of the source buffer is assumed to be in 23.9 fixed point format.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 16-bit signed/unsigned image buffer ID

The format of the source buffer is assumed to be in 25.7 fixed point format.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 32-bit signed image buffer ID

The fixed point format of the destination buffer is the same as that of the source.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Floating-point image buffer ID

If SrcImageRBufId is a floating-point buffer, this must also be a floating-point buffer and processing will be performed in floating-point arithmetic.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageIBufId

Specifies the identifier of the destination buffer for the imaginary component of the image in the spatial domain.

This buffer must be of the same type and pixel depth, and have the same dimensions and limitations as the buffer specified for DstImageRBufId.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_FFT

Performs a Fast Fourier transform.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_DEFAULT

Same as M_FORWARD.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_FORWARD +

Performs a forward transform on the image. For floating-point destination buffers, the processing will be performed in floating-point arithmetic.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageRBufId

Specifies the identifier of the source buffer for the real component of the image in the spatial domain.

The width and height of the source buffer must be a power of 2.

This image must not have a region of interest (ROI) associated with it. Using an image with an ROI will cause an error.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 8-bit signed/unsigned image buffer ID

Calculations are performed in fixed-point format and returned to the destinations in 23.9 fixed point format.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 16-bit signed/unsigned image buffer ID

Calculations are performed in fixed-point format and returned to the destinations in 25.7 fixed point format.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 32-bit signed image buffer ID

The fixed point format of the destination buffer will be the same as that of the source buffer.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Floating-point image buffer ID

The destination buffer should also be a floating-point buffer and processing will be performed in floating-point arithmetic.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageIBufId

Specifies the identifier of the source buffer for the imaginary component of the image in the spatial domain.

This buffer must be of the same type and pixel depth, and have the same dimensions and limitations as the buffer specified for SrcImageRBufId.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_NULL

Specifies that a faster version of the forward transform will be performed.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Image buffer ID

Specifies the identifier of the source buffer.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageRBufId

Specifies the identifier of the destination buffer for the real component of the image in the frequency domain. If SrcImageRBufId is an integer buffer, this can be a 32-bit signed integer buffer or a floating-point buffer. If SrcImageRBufId is a floating-point buffer, this must be a floating-point buffer also.

The width and height of the destination buffer must be a power of 2.

This image must not have a region of interest (ROI) associated with it. Using an image with an ROI will cause an error.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageIBufId

Specifies the identifier of the destination buffer for the imaginary component of the image in the frequency domain.

This buffer must be of the same type and pixel depth, and have the same dimensions and limitations as the buffer specified for DstImageRBufId.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_REVERSE +

Performs a reverse transform on the image.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageRBufId

Specifies the identifier of the source buffer for the real component of the image in the frequency domain. This must be a 32-bit integer buffer or a floating-point buffer.

The source buffer must be a 32-bit signed integer or a floating-point buffer.

The width and height of the source buffer must be a power of 2.

This image must not have a region of interest (ROI) associated with it. Using an image with an ROI will cause an error.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageIBufId

Specifies the identifier of the source buffer for the imaginary component of the image in the frequency domain.

This buffer must be of the same type and pixel depth, and have the same dimensions and limitations as the buffer specified for SrcImageRBufId.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageRBufId

Specifies the identifier of the destination buffer for the real component of the image in the spatial domain.

The width and height of the destination buffer must be a power of 2.

This image must not have a region of interest (ROI) associated with it. Using an image with an ROI will cause an error.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 8-bit signed/unsigned image buffer ID

The format of the source buffer is assumed to be in 23.9 fixed point format.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 16-bit signed/unsigned image buffer ID

The format of the source buffer is assumed to be in 25.7 fixed point format.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize 32-bit signed image buffer ID

The fixed point format of the destination buffer is the same as that of the source.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Floating-point image buffer ID

If SrcImageRBufId is a floating-point buffer, this must also be a floating-point buffer and processing will be performed in floating-point arithmetic.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageIBufId

Specifies the identifier of the destination buffer for the imaginary component of the image in the spatial domain.

This buffer must be of the same type and pixel depth, and have the same dimensions and limitations as the buffer specified for DstImageRBufId.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_NULL

Specifies that a faster version of the reverse transform will be performed.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Image buffer ID

Specifies the identifier of the destination buffer.

 ‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_POLAR

Performs a cartesian-to-polar or a polar-to-cartesian transform on the coordinates of the source buffer.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_DEFAULT

Same as M_FORWARD.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_FORWARD +

Converts the real and imaginary components of cartesian coordinates to the magnitude and phase components of polar coordinates.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageRBufId

Specifies the identifier of the source buffer for the real component of the cartesian coordinates. It must be a 32-bit floating-point buffer.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageIBufId

Specifies the identifier of the source buffer for the imaginary component of the cartesian coordinates. It must be provided.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageRBufId

Specifies the identifier of the destination buffer for the magnitude component of the polar coordinates.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_NULL

Specifies that a faster version of the forward transform will be performed.

Only one of the destination buffers can be set to M_NULL.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Image buffer ID

Specifies the identifier of the destination buffer. It must be a 32-bit floating-point buffer.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageIBufId

Specifies the identifier of the destination buffer for the phase component of the polar coordinates.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_NULL

Specifies that a faster version of the forward transform will be performed.

Only one of the destination buffers can be set to M_NULL.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize Image buffer ID

Specifies the identifier of the destination buffer. The phase results are comprised in the range of 0-360.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_REVERSE +

Converts the magnitude and phase components of polar coordinates to the real and imaginary components of cartesian coordinates.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageRBufId

Specifies the identifier of the source buffer for the magnitude component of the polar coordinates. It must be a 32-bit floating-point buffer.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize SrcImageIBufId

Specifies the identifier of the source buffer for the phase component of the polar coordaintes. It must be provided.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageRBufId

Specifies the identifier of the destination buffer for the real component of the cartesian coordinates. It must be a 32-bit floating-point buffers.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize DstImageIBufId

Specifies the identifier of the destination buffer for the imaginary component of the cartesian coordinates. The phase results are comprised in the range of 0-360.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Combination values for M_FORWARD (when TransformType=M_DCT8X8); M_FORWARD (when TransformType=M_FFT); M_REVERSE (when TransformType=M_DCT8X8); M_REVERSE (when TransformType=M_FFT).

You can add one or more of the following values to the above-mentioned values to set the transform characteristics.

Note that only M_NORMALIZE is supported with both M_FFT and M_DCT8X8. All other values are supported only with M_FFT.

function map For the ControlFlag parameter
Click to summarize
Combination value		 Description
Click to summarize M_1D_COLUMNS

Performs a 1D transform on all columns of the image.

If M_1D_COLUMNS has been specified with the forward transform, then it must be specified for the reverse transform as well.

(summarize)
Click to summarize M_1D_ROWS

Performs a 1D transform on all rows of the image.

If M_1D_ROWS has been specified with the forward transform, then it must be specified for the reverse transform as well.

(summarize)
Click to summarize M_CENTER

Centers the real and imaginary components of the image in the frequency domain by repositioning their respective buffers' quadrants. The DC component is positioned at (SizeX/2-1, SizeY/2-1), where SizeX and SizeY are the width and height of the source buffer, respectively.

If the size of the destination buffers is different from that of the source buffer, data that falls outside of the destination buffers is clipped; exceeding areas of the destination buffers are unaffected. See the Managing data buffers section of Chapter 21: Data buffers for more information.

If M_CENTER has been specified for the forward transform, then it must be specified for the reverse transform as well.

(summarize)
Click to summarize M_MAGNITUDE +

Specifies whether to compute or use the magnitude.

When used with M_FORWARD, computes the magnitude of the forward FFT (the square root of R 2 +I 2 ). The magnitude is returned in the DstImageRBufId destination buffer, thereby overwriting the real component of the destination image.

When used with M_REVERSE, computes the real component of the transform from the magnitude and phase ( R = M cos(P) ). The result will be used to perform the reverse FFT.

For a reverse FFT, SrcImageRBufId and SrcImageIBufId must contain the magnitude and phase of a forward transform, respectively.

M_MAGNITUDE must be used with M_PHASE for a reverse FFT.

For a forward FFT, DstImageIBufId can be set to M_NULL if M_MAGNITUDE is used without M_PHASE.

M_MAGNITUDE can only be used in transforms processed with floating-point buffers.

(summarize)
Click to summarize M_NORMALIZE

Normalizes results (divide the final result by 8 for DCT and by (m x n) for FFT where m x n is the size of the image). M_NORMALIZE must be used with fixed-point arithmetic (all integer buffers) to avoid overflows.

If M_NORMALIZE has been specified with the forward transform, then it must be specified for the reverse transform as well.

(summarize)
Click to summarize M_PHASE

Specifies whether to compute or use the phase.

When used with M_FORWARD, computes the phase of the forward transform ( P = atan(I/R) ). The phase is returned in the DstImageIBufId buffer, thereby overwriting the imaginary component of the destination image. The phase is returned in the range of 0° to 360°.

When used with M_REVERSE, computes the imaginary component of the transform from the magnitude and phase ( I = M sin(P) ). The result will be used to perform the reverse FFT.

For a reverse FFT, SrcImageRBufId and SrcImageIBufId must contain the magnitude and phase of a forward transform, respectively.

M_PHASE must be used with M_MAGNITUDE for a reverse FFT.

For a forward FFT, DstImageRBufId can be set to M_NULL if M_PHASE is used without M_MAGNITUDE.

M_PHASE can only be used in transforms processed with floating-point buffers.

(summarize)
Click to summarize M_SATURATION

Clips (saturates) the results of a reverse FFT according to the destination buffer's data type.

M_SATURATION can only be used with a reverse FFT (M_FFT + M_REVERSE) operation which uses floating-point source buffers and integer destination buffers.

(summarize)
Combination value for M_MAGNITUDE.

You can add the following value to the above-mentioned value to specify that the magnitude of the forward FFT is scaled logarithmically.

function map For M_MAGNITUDE
Click to summarize
Combination value		 Description MIL system-specific
tooltip (‡)
Click to summarize M_LOG_SCALE

Scales logarithmically the magnitude of the forward FFT to be in the range of 0-255. This value is used to scale the spectrum into a displayable range.

M_LOG_SCALE can only be used in forward transforms processed with floating-point buffers.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Combination values for M_FORWARD (when TransformType=M_POLAR); M_REVERSE (when TransformType=M_POLAR).

You can add one or more of the following values to the above-mentioned values to specify the transform characteristics.

function map For specifying the transform characteristics
Click to summarize
Combination value		 Description MIL system-specific
tooltip (‡)
Click to summarize M_FAST_PHASE

Performs faster phase computation.

For a forward polar transformation, it uses a faster computation of the phase results but slightly less accurate. For a reverse polar transformation, it has no effect.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_NORMALIZE_PHASE

Rescales the phase results.

For a forward polar transformation, it rescales the phase results to be in the range of 0.0-1.0. For a reverse polar transformation, SrcImageRBufId must contain the phase values in the range of 0.0-1.0.

This value cannot be used in combination with M_NORMALIZE_PHASE_255.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_NORMALIZE_PHASE_255

Rescales the phase results.

For a forward polar conversion, it rescales the phase results to be in the range of 0-255. For a reverse polar transformation, SrcImageIBufId must contain the phase values in the range of 0-255.

This value cannot be used in combination with M_NORMALIZE_PHASE.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Click to summarize M_SQUARE_MAGNITUDE

Specifies that the magnitude values are returned or used squared.

For a forward polar transformation, it gives the square of the magnitude results (that is, R 2 +I 2 ). For a reverse transformation, SrcImageRBufId must contain the magnitude values squared.

(summarize)
‡ a c
M10		 g h i j k
M10		 l m o p r
U27		 t
U28		 u
U36		 v y
U75		 aa
Compilation information
Header Include mil.h.
Library Use mil.lib; milim.lib.
DLL Requires mil.dll; milim.dll.
PROC PROC PROC PROC DCT8X8 DEFAULT FORWARD FLOAT NONE FLOAT NONE SIGNED NONE FLOAT NONE NULL PROC SIGNED FLOAT PROC NONE PROC REVERSE SIGNED FLOAT PROC NONE NULL PROC FLOAT PROC NONE FLOAT PROC NONE SIGNED PROC NONE FLOAT PROC NONE PROC FFT DEFAULT FORWARD FLOAT PROC NONE FLOAT PROC NONE SIGNED PROC NONE FLOAT PROC NONE NULL PROC SIGNED FLOAT PROC NONE PROC REVERSE SIGNED FLOAT PROC NONE PROC FLOAT PROC NONE FLOAT PROC NONE SIGNED PROC NONE FLOAT PROC NONE NULL POLAR DEFAULT FORWARD FLOAT FLOAT NULL FLOAT NULL FLOAT REVERSE FLOAT FLOAT FLOAT FLOAT 1D COLUMNS 1D ROWS CENTER MAGNITUDE NORMALIZE PHASE SATURATION LOG SCALE FAST PHASE NORMALIZE PHASE NORMALIZE PHASE 255 SQUARE MAGNITUDE FFT FORWARD FFT REVERSE POLAR FORWARD POLAR DCT8X8