| Customize Help
| Save Settings

MmodSave


Function Map
Syntax
Description
Parameters
- FileName
Table: For specifying the file name and path
- ContextId
- ControlFlag
Table: For specifying whether to save the camera calibration contexts associated with the models
Compilation information
Synopsis
Save a Model Finder context to a file.
Syntax
void MmodSave(
MIL_CONST_TEXT_PTR FileName, //in
MIL_ID ContextId, //in
MIL_INT64 ControlFlag //in
)
Description

This function saves all the information about the previously allocated Model Finder context to disk, including all of the individual models' current settings. This information can be reloaded, using MmodRestore() or MmodStream(). However, preprocessing and all drawing control type settings are not saved.

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.
Parameters
This function is not supported on the selected boards.
This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.
Parameters
FileName

Specifies the name and path of the file in which to save the Model Finder context; it is recommended that you use the MMF file extension for easier use with other Matrox Imaging software products. The function internally handles the opening and closing of this file. If this file already exists, it will be overwritten.

This parameter can be set to one of the following values:

function map For specifying the file name and path
Click to summarizeValue Description
Click to summarize M_INTERACTIVE
[This is only applicable to Windows]

Opens the File Save As dialog box from which you can interactively specify the drive, directory, and name of the file.
Click to summarize MIL_TEXT("FileName") 1

Specifies the drive, directory, and name of the file (for example, "C:\mydirectory\myfile"). Typically, Model Finder context files have an MMF extension.

To specify a file on a remote computer (under Distributed MIL), prefix the specified file name string with "remote:///" (for example, "remote:///C:\mydirectory\myfile").

(summarize)

1 If you are passing the value in a variable, don't enclose it in MIL_TEXT().

ContextId

Specifies the identifier of the Model Finder context to save.

ControlFlag

Specifies whether to save, with the Model Finder context, the camera calibration contexts associated with the models.

function map For specifying whether to save the camera calibration contexts associated with the models
Click to summarizeValue Description
Click to summarize M_DEFAULT

Specifies that the camera calibration contexts are not saved.
Click to summarize M_WITH_CALIBRATION

Specifies that the camera calibration contexts are saved. The camera calibration information is saved in the same file as the Model Finder context. Note that the camera calibration contexts associated with synthetic models are not saved.

(summarize)
Compilation information
Header Include mil.h.
Library Use mil.lib; milmod.lib.
DLL Requires mil.dll; milmod.dll.
INTERACTIVE DEFAULT WITH CALIBRATION