MimFlip

User Guide:

Basic geometric transforms Calibration propagation Customizing read and grading operation settings Propagating calibration information after performing a geometric operation Warping

Reference:

MbufInquire

Available in MIL-Lite

Available in MIL

Available on Windows

Available on Linux

Partially supported on:

Matrox GPU processing driver

Fully supported on:

Host system

Matrox CronosPlus

Matrox GigE Vision driver

Matrox IEEE 1394 IIDC driver

Matrox Iris GT

Matrox Morphis

Matrox Morphis QxT

Matrox Orion HD

Matrox Radient eCL

Matrox Radient eV-CXP

Matrox Solios eA/XA

Matrox Solios ecl/xcl/ev-cl

Matrox USB3 Vision driver (requires Update 19)

Matrox Vio

For any information regarding a MIL system added during a MIL Update, see the MIL system’s release note

Available on Non-Matrox computer

Available on Matrox 4Sight-X

Available on Matrox 4Sight GP

Available on Matrox Supersight

Function Map

- Operation

Table:

for specifying the operation to perform

- OpFlag

Compilation information

kinectcamerainterface.cpp
mil3dcam_sickrangerc.cpp
mil3dcam_sickrangere.cpp
sickrangere.cpp

MimFlatField

MimFree

Synopsis

Perform a horizontal or vertical image-flipping operation.

Syntax

void MimFlip(

MIL_ID SrcImageBufId,	//in
MIL_ID DstImageBufId,	//in
MIL_INT64 Operation,	//in
MIL_INT64 OpFlag	//in

)

Description

This function flips the source image to the destination image according to the specified operation.

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.

Parameters

This function is not supported on the selected boards.

This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.

Parameters

SrcImageBufId

Specifies the identifier of the source image buffer.

This image buffer must not have a region of interest (ROI) associated with it. Using an image buffer with an ROI will cause an error.

[Matrox GPU processing driver]

The source image buffer must be unsigned monochrome 8- or 16-bit, or M_BGR32 packed.

DstImageBufId

Specifies the identifier of the destination image buffer.

This image buffer must not have a region of interest (ROI) associated with it. Using an image buffer with an ROI will cause an error.

Note that after performing the operation, the destination image will not be calibrated, even if the source image was calibrated.

[Matrox GPU processing driver]

The destination image buffer must be unsigned monochrome 8- or 16-bit, or M_BGR32 packed.

Operation

Specifies the operation to perform. This parameter can be set to one of the following:

for specifying the operation to perform
Value	Description
M_FLIP_HORIZONTAL	Flips the image in a horizontal direction (left to right, along a vertical axis).
M_FLIP_VERTICAL	Flips the image in a vertical direction (top to bottom, along a horizontal axis).

OpFlag

Reserved for future expansion. Must be set to M_DEFAULT.

Compilation information

Header	Include mil.h.
Library	Use mil.lib; milim.lib.
DLL	Requires mil.dll; milim.dll.