| Customize Help
| Save Settings

MedgeAllocResult



Function Map
Synopsis
Allocate an Edge Finder result buffer.
Syntax
MIL_ID MedgeAllocResult(
MIL_ID SystemId, //in
MIL_INT64 ControlFlag, //in
MIL_ID *EdgeResultIdPtr //out
)
Description

This function allocates an Edge Finder result buffer, on the specified system, to store results obtained from an MedgeCalculate() operation. When the Edge Finder result buffer is no longer required, release its memory, using MedgeFree().

Note that this function reference has not been updated for a MIL system added during a MIL update. Refer to the MIL system's release note to see which MIL system’s documentation you should use in its place and any possible differences.
Parameters
This function is not supported on the selected boards.
This function reference has not been updated for the selected MIL system. To show the content of this page, choose a second MIL system; refer to the MIL system's release note to see which MIL system’s documentation to choose and any possible differences.
Parameters
SystemId INQ

Specifies the system on which to allocate the Edge Finder result buffer.

This parameter should be set to one of the following values:

function map For specifying the system
Click to summarizeValue Description
Click to summarize M_DEFAULT_HOST

Specifies the default Host system of the current MIL application.

Click to summarize MIL system identifier

Specifies a valid system identifier, previously allocated using MsysAlloc().

ControlFlag

Reserved for future expansion and must be set to M_DEFAULT.

EdgeResultIdPtr

Specifies the address of the variable in which to write the Edge Finder result buffer identifier. Since the MedgeAllocResult() function also returns the Edge Finder result buffer identifier, you can set this parameter to M_NULL.

Return value
The returned value is the result identifier if the allocation is successful. If allocation fails, M_NULL is returned.
Compilation information
Header Include mil.h.
Library Use mil.lib; miledge.lib.
DLL Requires mil.dll; miledge.dll.
DEFAULT HOST