Matrox RadientPro CL-SF connectors and signal names

See also

Reference:

This section serves as a reference to match Matrox RadientPro CL-SF connectors and auxiliary signals with MIL information, such as MIL auxiliary/camera control signal numbers. To set/inquire all the settings for this board's auxiliary signals (for example, signal routing and timer settings), use MdigControl() / MdigInquire(), respectively.

The Matrox RadientPro CL-SF has only one acquisition path, so all auxiliary signals can be used.

Auxiliary I/O signals can have one or more functionalities (for example, trigger input, timer output, or user output, depending on the signal). Their possible functionalities are described in their description in the pinout table below. Note that, unlike some other Matrox frame grabbers, there is no limit to the number of events that can be triggered simultaneously using the auxiliary input signals, nor is there a restriction on which auxiliary signal can be used to trigger the event.

Only those auxiliary signals that have matching MIL information are included in this section. For information on internal connectors and a comprehensive list of all available input and output signals, refer to the board's installation and hardware reference manual.

Board connectors

The Matrox RadientPro CL-SF board and cable adapter bracket provide several interface connectors. On the bracket of Matrox RadientPro CL-SF, there are two Camera Link video input connectors and one auxiliary I/O connector. On the cable adapter bracket there are two external auxiliary I/O connector, one of which is unused.

Only the following connectors have auxiliary signals with matching MIL information.

Connector Name

Connector Abbreviation

Image

Description

Camera Link video input connectors

SDR (0 and 1)

The Camera Link video input connectors are 26-pin high-density female mini Camera Link connectors. They are used to receive video input, timing, synchronization signals and transmit/receive communication signals between the video source and the frame grabber. There are two Camera Link video input connectors (SDR 0 and 1) on Matrox RadientPro CL-SF.

External auxiliary I/O connector

DBHD-15 (A and C)

The external auxiliary I/O connectors are high-density D-subminiature 15-pin male connectors. They are used to transmit/receive auxiliary signals.

External auxiliary I/O connector A is located on Matrox RadientPro CL-SF, and external auxiliary I/O connector C is located on the cable adapter bracket.

Signal names and their matching MIL constants

The table below lists the auxiliary signals with their associated MIL information.

Sort by: Filter by: Tables:

Digitizer device #			Description
	MIL I/O #
		Pin information
		Direction
		User-bit information
		Trigger information
		Timer information
		Hardware manual signal name
Digitizer device #: M_DEV0			Indicates the following. (summarize) Indicates the following. (more details...)
	MIL I/O #: M_AUX_IO0		Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize) Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...)
		Pin information	Connector: DBHD-15 (C) Pin: 15+, 9-
		Direction	Input
		Trigger information	Trigger controller: 2 on acq path 0. M_AUX_IO0; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0.
		Hardware manual signal name	OPTO_AUX_IN8
	MIL I/O #: M_AUX_IO1		Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize) Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...)
		Pin information	Connector: DBHD-15 (C) Pin: 12+, 11-
		Direction	Input
		Trigger information	Trigger controller: 3 on acq path 0. M_AUX_IO1; Digitizer device #: M_DEV0; Trigger controller: 3 on acq path 0.
		Hardware manual signal name	OPTO_AUX_IN9
	MIL I/O #: M_AUX_IO2		TTL auxiliary signal (input/output) for acquisition path 0, which supports: trigger input, user input, user output, or timer output. (summarize) TTL auxiliary signal (input/output) for acquisition path 0, which supports: trigger input, user input, user output, or timer output. (more details...)
		Pin information	Connector: DBHD-15 (A) Pin: 3
		Direction	Input/Output
		User-bit information	MIL user-bit #: M_USER_BIT4; Digitizer device #: M_DEV0;
		Trigger information	Trigger controller: 2 on acq path 0. M_AUX_IO2; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0.
		Timer information	Timer: M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	TTL_AUX_IO_6
	MIL I/O #: M_AUX_IO3		TTL auxiliary signal (input/output) for acquisition path 0, which supports: trigger input, user input, or user output. (summarize) TTL auxiliary signal (input/output) for acquisition path 0, which supports: trigger input, user input, or user output. (more details...)
		Pin information	Connector: DBHD-15 (C) Pin: 3
		Direction	Input/Output
		User-bit information	MIL user-bit #: M_USER_BIT5; Digitizer device #: M_DEV0;
		Trigger information	Trigger controller: 3 on acq path 0. M_AUX_IO3; Digitizer device #: M_DEV0; Trigger controller: 3 on acq path 0.
		Hardware manual signal name	TTL_AUX_IO_14
	MIL I/O #: M_AUX_IO4		LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize) LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...)
		Pin information	Connector: DBHD-15 (C) Pin: 4+, 5-
		Direction	Input
		Trigger information	Trigger controller: 2 on acq path 0. M_AUX_IO4; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0.
		Hardware manual signal name	LVDS_AUX_IN10
	MIL I/O #: M_AUX_IO5		LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize) LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...)
		Pin information	Connector: DBHD-15 (C) Pin: 6+, 8-
		Direction	Input
		Trigger information	Trigger controller: 3 on acq path 0. M_AUX_IO5; Digitizer device #: M_DEV0; Trigger controller: 3 on acq path 0.
		Hardware manual signal name	LVDS_AUX_IN11
	MIL I/O #: M_AUX_IO6		Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: user input or trigger input. (summarize) Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: user input or trigger input. (more details...)
		Pin information	Connector: DBHD-15 (A) Pin: 15+, 9-
		Direction	Input
		Trigger information	Trigger controller: 0 on acq path 0. M_AUX_IO6; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0.
		Hardware manual signal name	OPTO_AUX_IN0
	MIL I/O #: M_AUX_IO7		Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: user input or trigger input. (summarize) Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: user input or trigger input. (more details...)
		Pin information	Connector: DBHD-15 (A) Pin: 12+, 11-
		Direction	Input
		Trigger information	Trigger controller: 1 on acq path 0. M_AUX_IO7; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0.
		Hardware manual signal name	OPTO_AUX_IN1
	MIL I/O #: M_AUX_IO8		TTL auxiliary signal (input/output) for acquisition path 0, which supports: user input/output, trigger input. (summarize) TTL auxiliary signal (input/output) for acquisition path 0, which supports: user input/output, trigger input. (more details...)
		Pin information	Connector: DBHD-15 (A) Pin: 1
		Direction	Input/Output
		User-bit information	MIL user-bit #: M_USER_BIT2; Digitizer device #: M_DEV0;
		Trigger information	Trigger controller: 0 on acq path 0. M_AUX_IO8; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0.
		Hardware manual signal name	TTL_AUX_IO_4
	MIL I/O #: M_AUX_IO9		TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input, or user output. (summarize) TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input, or user output. (more details...)
		Pin information	Connector: DBHD-15 (A) Pin: 2
		Direction	Input/Output
		User-bit information	MIL user-bit #: M_USER_BIT3; Digitizer device #: M_DEV0;
		Trigger information	Trigger controller: 1 on acq path 0. M_AUX_IO9; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0.
		Timer information	Timer: M_TIMER1; Digitizer device #: M_DEV0;
		Hardware manual signal name	TTL_AUX_IO_5
	MIL I/O #: M_AUX_IO10		LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or quadrature input bit 0. (summarize) LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or quadrature input bit 0. (more details...)
		Pin information	Connector: DBHD-15 (A) Pin: 4+, 5-
		Direction	Input
		Trigger information	Trigger controller: 0 on acq path 0. M_AUX_IO10; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0.
		Hardware manual signal name	LVDS_AUX_IN2
	MIL I/O #: M_AUX_IO11		LVDS auxiliary signal (input) for acquisition path 0, which supports: user input, trigger input, timer-clock input, or quadrature input bit 1. (summarize) LVDS auxiliary signal (input) for acquisition path 0, which supports: user input, trigger input, timer-clock input, or quadrature input bit 1. (more details...)
		Pin information	Connector: DBHD-15 (A) Pin: 6+, 8-
		Direction	Input
		Trigger information	Trigger controller: 1 on acq path 0. M_AUX_IO11; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0.
		Hardware manual signal name	LVDS_AUX_IN3
	MIL I/O #: M_AUX_IO12		LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize) LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...)
		Pin information	Connector: DBHD-15 (A) Pin: 13+, 14-
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT0; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	LVDS_AUX_OUT7
	MIL I/O #: M_CC_IO1		Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal: M_AUX_IO1 on M_DEV0 ( OPTO_AUX_IN9 ). M_AUX_IO2 on M_DEV0 ( TTL_AUX_IO_6 ). M_AUX_IO5 on M_DEV0 ( LVDS_AUX_IN11 ). M_AUX_IO7 on M_DEV0 ( OPTO_AUX_IN1 ). M_AUX_IO8 on M_DEV0 ( TTL_AUX_IO_4 ). M_AUX_IO10 on M_DEV0 ( LVDS_AUX_IN2 ). (summarize) Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. (more details...)
		Pin information	Connector: HDR/SDR (0) Pin: 5+, 18-
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	CC1 (0)
	MIL I/O #: M_CC_IO2		Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal: M_AUX_IO1 on M_DEV0 ( OPTO_AUX_IN9 ). M_AUX_IO2 on M_DEV0 ( TTL_AUX_IO_6 ). M_AUX_IO5 on M_DEV0 ( LVDS_AUX_IN11 ). M_AUX_IO7 on M_DEV0 ( OPTO_AUX_IN1 ). M_AUX_IO8 on M_DEV0 ( TTL_AUX_IO_4 ). M_AUX_IO10 on M_DEV0 ( LVDS_AUX_IN2 ). (summarize) Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. (more details...)
		Pin information	Connector: HDR/SDR (0) Pin: 17+, 4-
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	CC2 (0)
	MIL I/O #: M_CC_IO3		Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal: M_AUX_IO1 on M_DEV0 ( OPTO_AUX_IN9 ). M_AUX_IO2 on M_DEV0 ( TTL_AUX_IO_6 ). M_AUX_IO5 on M_DEV0 ( LVDS_AUX_IN11 ). M_AUX_IO7 on M_DEV0 ( OPTO_AUX_IN1 ). M_AUX_IO8 on M_DEV0 ( TTL_AUX_IO_4 ). M_AUX_IO10 on M_DEV0 ( LVDS_AUX_IN2 ). (summarize) Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. (more details...)
		Pin information	Connector: HDR/SDR (0) Pin: 3+, 16-
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	CC3 (0)
	MIL I/O #: M_CC_IO4		Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal: M_AUX_IO1 on M_DEV0 ( OPTO_AUX_IN9 ). M_AUX_IO2 on M_DEV0 ( TTL_AUX_IO_6 ). M_AUX_IO5 on M_DEV0 ( LVDS_AUX_IN11 ). M_AUX_IO7 on M_DEV0 ( OPTO_AUX_IN1 ). M_AUX_IO8 on M_DEV0 ( TTL_AUX_IO_4 ). M_AUX_IO10 on M_DEV0 ( LVDS_AUX_IN2 ). (summarize) Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. (more details...)
		Pin information	Connector: HDR/SDR (0) Pin: 15+, 2-
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	CC4 (0)

Connector			Description
	Pin
		MIL I/O information
		Direction
		User-bit information
		Trigger information
		Timer information
		Hardware manual signal name
Connector: DBHD-15 (A)			Indicates the following. (summarize) Indicates the following. (more details...)
	Pin: 1		TTL auxiliary signal (input/output) for acquisition path 0, which supports: user input/output, trigger input. (summarize) TTL auxiliary signal (input/output) for acquisition path 0, which supports: user input/output, trigger input. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO8; Digitizer device #: M_DEV0;
		Direction	Input/Output
		User-bit information	MIL user-bit #: M_USER_BIT2; Digitizer device #: M_DEV0;
		Trigger information	Trigger controller: 0 on acq path 0. M_AUX_IO8; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0.
		Hardware manual signal name	TTL_AUX_IO_4
	Pin: 2		TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input, or user output. (summarize) TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input, or user output. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO9; Digitizer device #: M_DEV0;
		Direction	Input/Output
		User-bit information	MIL user-bit #: M_USER_BIT3; Digitizer device #: M_DEV0;
		Trigger information	Trigger controller: 1 on acq path 0. M_AUX_IO9; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0.
		Timer information	Timer: M_TIMER1; Digitizer device #: M_DEV0;
		Hardware manual signal name	TTL_AUX_IO_5
	Pin: 3		TTL auxiliary signal (input/output) for acquisition path 0, which supports: trigger input, user input, user output, or timer output. (summarize) TTL auxiliary signal (input/output) for acquisition path 0, which supports: trigger input, user input, user output, or timer output. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO2; Digitizer device #: M_DEV0;
		Direction	Input/Output
		User-bit information	MIL user-bit #: M_USER_BIT4; Digitizer device #: M_DEV0;
		Trigger information	Trigger controller: 2 on acq path 0. M_AUX_IO2; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0.
		Timer information	Timer: M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	TTL_AUX_IO_6
	Pin: 4+, 5-		LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or quadrature input bit 0. (summarize) LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or quadrature input bit 0. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO10; Digitizer device #: M_DEV0;
		Direction	Input
		Trigger information	Trigger controller: 0 on acq path 0. M_AUX_IO10; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0.
		Hardware manual signal name	LVDS_AUX_IN2
	Pin: 6+, 8-		LVDS auxiliary signal (input) for acquisition path 0, which supports: user input, trigger input, timer-clock input, or quadrature input bit 1. (summarize) LVDS auxiliary signal (input) for acquisition path 0, which supports: user input, trigger input, timer-clock input, or quadrature input bit 1. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO11; Digitizer device #: M_DEV0;
		Direction	Input
		Trigger information	Trigger controller: 1 on acq path 0. M_AUX_IO11; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0.
		Hardware manual signal name	LVDS_AUX_IN3
	Pin: 12+, 11-		Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: user input or trigger input. (summarize) Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: user input or trigger input. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO7; Digitizer device #: M_DEV0;
		Direction	Input
		Trigger information	Trigger controller: 1 on acq path 0. M_AUX_IO7; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0.
		Hardware manual signal name	OPTO_AUX_IN1
	Pin: 13+, 14-		LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize) LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO12; Digitizer device #: M_DEV0;
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT0; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	LVDS_AUX_OUT7
	Pin: 15+, 9-		Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: user input or trigger input. (summarize) Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: user input or trigger input. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO6; Digitizer device #: M_DEV0;
		Direction	Input
		Trigger information	Trigger controller: 0 on acq path 0. M_AUX_IO6; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0.
		Hardware manual signal name	OPTO_AUX_IN0
Connector: DBHD-15 (C)			Indicates the following. (summarize) Indicates the following. (more details...)
	Pin: 3		TTL auxiliary signal (input/output) for acquisition path 0, which supports: trigger input, user input, or user output. (summarize) TTL auxiliary signal (input/output) for acquisition path 0, which supports: trigger input, user input, or user output. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO3; Digitizer device #: M_DEV0;
		Direction	Input/Output
		User-bit information	MIL user-bit #: M_USER_BIT5; Digitizer device #: M_DEV0;
		Trigger information	Trigger controller: 3 on acq path 0. M_AUX_IO3; Digitizer device #: M_DEV0; Trigger controller: 3 on acq path 0.
		Hardware manual signal name	TTL_AUX_IO_14
	Pin: 4+, 5-		LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize) LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO4; Digitizer device #: M_DEV0;
		Direction	Input
		Trigger information	Trigger controller: 2 on acq path 0. M_AUX_IO4; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0.
		Hardware manual signal name	LVDS_AUX_IN10
	Pin: 6+, 8-		LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize) LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO5; Digitizer device #: M_DEV0;
		Direction	Input
		Trigger information	Trigger controller: 3 on acq path 0. M_AUX_IO5; Digitizer device #: M_DEV0; Trigger controller: 3 on acq path 0.
		Hardware manual signal name	LVDS_AUX_IN11
	Pin: 12+, 11-		Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize) Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO1; Digitizer device #: M_DEV0;
		Direction	Input
		Trigger information	Trigger controller: 3 on acq path 0. M_AUX_IO1; Digitizer device #: M_DEV0; Trigger controller: 3 on acq path 0.
		Hardware manual signal name	OPTO_AUX_IN9
	Pin: 15+, 9-		Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize) Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...)
		MIL I/O information	MIL I/O #:M_AUX_IO0; Digitizer device #: M_DEV0;
		Direction	Input
		Trigger information	Trigger controller: 2 on acq path 0. M_AUX_IO0; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0.
		Hardware manual signal name	OPTO_AUX_IN8
Connector: HDR/SDR (0)			Indicates the following. (summarize) Indicates the following. (more details...)
	Pin: 3+, 16-		Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal: M_AUX_IO1 on M_DEV0 ( OPTO_AUX_IN9 ). M_AUX_IO2 on M_DEV0 ( TTL_AUX_IO_6 ). M_AUX_IO5 on M_DEV0 ( LVDS_AUX_IN11 ). M_AUX_IO7 on M_DEV0 ( OPTO_AUX_IN1 ). M_AUX_IO8 on M_DEV0 ( TTL_AUX_IO_4 ). M_AUX_IO10 on M_DEV0 ( LVDS_AUX_IN2 ). (summarize) Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. (more details...)
		MIL I/O information	MIL I/O #:M_CC_IO3; Digitizer device #: M_DEV0;
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	CC3 (0)
	Pin: 5+, 18-		Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal: M_AUX_IO1 on M_DEV0 ( OPTO_AUX_IN9 ). M_AUX_IO2 on M_DEV0 ( TTL_AUX_IO_6 ). M_AUX_IO5 on M_DEV0 ( LVDS_AUX_IN11 ). M_AUX_IO7 on M_DEV0 ( OPTO_AUX_IN1 ). M_AUX_IO8 on M_DEV0 ( TTL_AUX_IO_4 ). M_AUX_IO10 on M_DEV0 ( LVDS_AUX_IN2 ). (summarize) Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. (more details...)
		MIL I/O information	MIL I/O #:M_CC_IO1; Digitizer device #: M_DEV0;
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	CC1 (0)
	Pin: 15+, 2-		Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal: M_AUX_IO1 on M_DEV0 ( OPTO_AUX_IN9 ). M_AUX_IO2 on M_DEV0 ( TTL_AUX_IO_6 ). M_AUX_IO5 on M_DEV0 ( LVDS_AUX_IN11 ). M_AUX_IO7 on M_DEV0 ( OPTO_AUX_IN1 ). M_AUX_IO8 on M_DEV0 ( TTL_AUX_IO_4 ). M_AUX_IO10 on M_DEV0 ( LVDS_AUX_IN2 ). (summarize) Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. (more details...)
		MIL I/O information	MIL I/O #:M_CC_IO4; Digitizer device #: M_DEV0;
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	CC4 (0)
	Pin: 17+, 4-		Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal: M_AUX_IO1 on M_DEV0 ( OPTO_AUX_IN9 ). M_AUX_IO2 on M_DEV0 ( TTL_AUX_IO_6 ). M_AUX_IO5 on M_DEV0 ( LVDS_AUX_IN11 ). M_AUX_IO7 on M_DEV0 ( OPTO_AUX_IN1 ). M_AUX_IO8 on M_DEV0 ( TTL_AUX_IO_4 ). M_AUX_IO10 on M_DEV0 ( LVDS_AUX_IN2 ). (summarize) Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC output, HSYNC output, clock output, or rerouting of specific auxiliary input signals. (more details...)
		MIL I/O information	MIL I/O #:M_CC_IO2; Digitizer device #: M_DEV0;
		Direction	Output
		User-bit information	MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1; Digitizer device #: M_DEV0;
		Timer information	Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0;
		Hardware manual signal name	CC2 (0)