This section serves as a reference to match Matrox Solios eCL/XCL-B's connectors and auxiliary/camera control signals with MIL information, such as MIL auxiliary/camera control signal numbers. To set/inquire all the settings for this board's auxiliary/camera control signals (for example, signal routing and timer settings), use MdigControl() / MdigInquire(), respectively.
Matrox Solios eCL/XCL-B has only one acquisition path, so all auxiliary signals can be used.
Auxiliary I/O signals and camera control signals can have one or more functionalities (for example, trigger input, timer output, or user output, depending on the signal). Their possible functionalities are described in their description in the pinout table below. The Matrox Solios eCL/XCL-B board has 3 trigger controllers on its acquisition path, so that on-board events (for example, acquisition and timer output) can start upon different triggers if required. Although a trigger controller might support several trigger input signals, only one signal can drive a trigger controller at any given time. For example, if you set signal A as the trigger input source for acquisition, and signal B as the trigger input source for timer 1, signal A and B must be driving different trigger controllers; if they drive the same trigger controller, an error is generated. Note that you can set a signal (for example, signal A) as the trigger input source for both acquisition and timer 1; in this case, the associated trigger controller triggers both events at the same time.
Only those auxiliary/camera control signals that have matching MIL information are included in this section. For information on internal connectors and a comprehensive list of all available input and output signals, refer to the board's installation and hardware reference manual.
On the Matrox Solios eCL/XCL-B board, there are two interface connectors. On its bracket, there is one Camera Link video input connector and one auxiliary I/O connector (DBHD-15 or DB-9). It does not come with an adapter board/bracket.
All of Matrox Solios eCL/XCL-B's connectors have auxiliary/camera control signals with matching MIL information.
Connector Name |
Connector Abbreviation |
Image |
Description |
Camera Link video input connector |
MDR |
![]() |
The Camera Link video input connector is a 26-pin high-density D ribbon connector. It is used to receive video input, timing, and synchronization signals and transmit/receive communication signals between the video source and the frame grabber. |
External auxiliary I/O connector 0 |
DB-9 or DBHD-15 |
![]() ![]() |
External auxiliary I/O connector 0 can be either a standard D-subminiature 9-pin connector or a high-density D-subminiature 15-pin male connector. In either case, the connector is used to transmit timing and synchronization signals, and transmit/receive auxiliary signals. This connector is located on the main bracket. Note that if this external auxiliary connector is a DB-9 connector, some DBHD-15 signals are not available. |
The table below lists the auxiliary/camera control signals with their associated MIL information. Note that the MIL constants in this table are those to use with MIL 10 and later. If you are upgrading from a previous version of MIL, you should port your code using the conversion tables for the Matrox Solios eCL/XCL (MILSoliosCameraLinkIOConversionTable) in the MIL release notes.
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 3 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information | Trigger controller: 2 on acq
path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0. |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 7+, 2-; Connector: DBHD-15 Pin: 15+, 9- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Hardware manual signal name | P0_OPTO_AUX_IN0 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 4+, 5-; Connector: DBHD-15 Pin: 12+, 11- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Hardware manual signal name | P0_OPTO_AUX_IN1 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 2 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
||
Pin information | Connector: DB-9 Pin: 8+, 3-; Connector: DBHD-15 Pin: 4+, 5- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Hardware manual signal name | P0_LVDS_AUX_IN0 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 6+, 8- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT11; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Hardware manual signal name | P0_LVDS_AUX_IN1 | ||
![]() ![]() |
LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize)LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 13+, 14- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 5 on acq path 0 )
|
||
Timer information | Timer: M_TIMER1; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_LVDS_AUX_OUT0 | ||
![]() ![]() |
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 5+, 18- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC1 | ||
![]() ![]() |
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 17+, 4- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC2 | ||
![]() ![]() |
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 3+, 16- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC3 | ||
![]() ![]() |
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 15+, 2- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC4 |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 3 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information | Trigger controller: 2 on acq
path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0. |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 7+, 2-; Connector: DBHD-15 Pin: 15+, 9- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Hardware manual signal name | P0_OPTO_AUX_IN0 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 4+, 5-; Connector: DBHD-15 Pin: 12+, 11- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Hardware manual signal name | P0_OPTO_AUX_IN1 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 2 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
||
Pin information | Connector: DB-9 Pin: 8+, 3-; Connector: DBHD-15 Pin: 4+, 5- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Hardware manual signal name | P0_LVDS_AUX_IN0 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 6+, 8- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT11; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Hardware manual signal name | P0_LVDS_AUX_IN1 |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 3 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information | Trigger controller: 2 on acq
path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0. |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 2 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize)LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 13+, 14- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 5 on acq path 0 )
|
||
Timer information | Timer: M_TIMER1; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_LVDS_AUX_OUT0 | ||
![]() ![]() |
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 5+, 18- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC1 | ||
![]() ![]() |
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 17+, 4- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC2 | ||
![]() ![]() |
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 3+, 16- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC3 | ||
![]() ![]() |
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 15+, 2- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC4 |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 3 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information | Trigger controller: 2 on acq
path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0. |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 2 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 3 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information | Trigger controller: 2 on acq
path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0. |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 2 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize)LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 13+, 14- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 5 on acq path 0 )
|
||
Timer information | Timer: M_TIMER1; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_LVDS_AUX_OUT0 | ||
![]() ![]() |
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 5+, 18- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC1 | ||
![]() ![]() |
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 17+, 4- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC2 | ||
![]() ![]() |
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 3+, 16- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC3 | ||
![]() ![]() |
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
Pin information | Connector: MDR Pin: 15+, 2- | ||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC4 |
![]() ![]() |
Description | ||
MIL I/O # | |||
Pin information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 3 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information | Trigger controller: 2 on acq
path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; Trigger controller: 2 on acq path 0. |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 7+, 2-; Connector: DBHD-15 Pin: 15+, 9- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Hardware manual signal name | P0_OPTO_AUX_IN0 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 4+, 5-; Connector: DBHD-15 Pin: 12+, 11- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Hardware manual signal name | P0_OPTO_AUX_IN1 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 2 | ||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
||
Pin information | Connector: DB-9 Pin: 8+, 3-; Connector: DBHD-15 Pin: 4+, 5- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 0 on acq
path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; Trigger controller: 0 on acq path 0. |
||
Hardware manual signal name | P0_LVDS_AUX_IN0 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (more details...) |
||
Pin information | Connector: DBHD-15 Pin: 6+, 8- | ||
Direction |
Input |
||
Trigger information | Trigger controller: 1 on acq
path 0. M_HARDWARE_PORT11; Digitizer device #: M_DEV0; Trigger controller: 1 on acq path 0. |
||
Hardware manual signal name | P0_LVDS_AUX_IN1 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN1 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN0 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_LVDS_AUX_IN0 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_LVDS_AUX_IN0 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO11;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT11; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_LVDS_AUX_IN1 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN1 | ||
![]() ![]() |
LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize)LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO12;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 5 on acq path 0 )
|
||
Timer information | Timer: M_TIMER1; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_LVDS_AUX_OUT0 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN0 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO3;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC3 | ||
![]() ![]() |
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC1 | ||
![]() ![]() |
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO4;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC4 | ||
![]() ![]() |
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO2;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC2 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN1 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN0 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_LVDS_AUX_IN0 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_LVDS_AUX_IN0 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO11;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT11; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_LVDS_AUX_IN1 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN1 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN0 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize)LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO12;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 5 on acq path 0 )
|
||
Timer information | Timer: M_TIMER1; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_LVDS_AUX_OUT0 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO3;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC3 | ||
![]() ![]() |
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC1 | ||
![]() ![]() |
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO4;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC4 | ||
![]() ![]() |
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO2;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC2 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize)LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO12;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT0;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 5 on acq path 0 )
|
||
Timer information | Timer: M_TIMER1; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_LVDS_AUX_OUT0 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO3;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC3 | ||
![]() ![]() |
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC1 | ||
![]() ![]() |
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO4;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC4 | ||
![]() ![]() |
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
||
MIL I/O information | MIL I/O #:M_CC_IO2;
Digitizer device #: M_DEV0;
|
||
Direction |
Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
||
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | CC2 |
![]() ![]() |
Description | ||
Pin | |||
MIL I/O information | |||
Direction | |||
User-bit information | |||
Trigger information | |||
Timer information | |||
Hardware manual signal name | |||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN1 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN0 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_LVDS_AUX_IN0 | ||
![]() ![]() |
Indicates the following. (summarize)Indicates the following. (more details...) |
||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_0 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_1 | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
||
Direction |
Input/Output |
||
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
||
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
||
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; | ||
Hardware manual signal name | P0_TTL_AUX_IO_2 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO10;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_LVDS_AUX_IN0 | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO11;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT11; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_LVDS_AUX_IN1 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO7;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN1 | ||
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
||
MIL I/O information | MIL I/O #:M_AUX_IO6;
Digitizer device #: M_DEV0;
|
||
Direction |
Input |
||
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; |
||
Hardware manual signal name | P0_OPTO_AUX_IN0 |
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 5+, 18- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO2;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 17+, 4- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO3;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 3+, 16- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO4;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 15+, 2- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO10;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 8+, 3-; Connector: DBHD-15 Pin: 4+, 5- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; |
|
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO11;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 6+, 8- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT11; Digitizer device #: M_DEV0; |
|
![]() ![]() |
LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize)LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO12;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 13+, 14- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT0;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 5 on acq path 0 )
|
|
Timer information | Timer: M_TIMER1; Digitizer device #: M_DEV0; | |
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO6;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 7+, 2-; Connector: DBHD-15 Pin: 15+, 9- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; |
|
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO7;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 4+, 5-; Connector: DBHD-15 Pin: 12+, 11- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; |
|
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 2 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 3 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; |
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO10;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 8+, 3-; Connector: DBHD-15 Pin: 4+, 5- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; |
|
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO11;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 6+, 8- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT11; Digitizer device #: M_DEV0; |
|
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO6;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 7+, 2-; Connector: DBHD-15 Pin: 15+, 9- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; |
|
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO7;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 4+, 5-; Connector: DBHD-15 Pin: 12+, 11- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; |
|
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 2 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 3 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; |
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 5+, 18- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO2;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 17+, 4- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO3;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 3+, 16- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO4;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 15+, 2- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize)LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO12;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 13+, 14- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT0;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 5 on acq path 0 )
|
|
Timer information | Timer: M_TIMER1; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 2 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 3 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; |
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 2 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 3 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; |
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 1 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 5+, 18- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 2 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO2;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 17+, 4- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 3 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO3;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 3+, 16- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. Only the following auxiliary input signals can be rerouted to this output signal:
Camera control output 4 for acquisition path 0, which supports: timer output, user output, VSYNC, HSYNC, clock output, or rerouting of specific auxiliary input signals. (more details...) |
|
MIL I/O information | MIL I/O #:M_CC_IO4;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: MDR Pin: 15+, 2- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1;
Digitizer device #: M_DEV0;
|
|
Timer information | Timer: M_TIMER1/M_TIMER2; Digitizer device #: M_DEV0; | |
![]() ![]() |
LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (summarize)LVDS auxiliary signal (output) for acquisition path 0, which supports: timer output or user output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO12;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 13+, 14- | |
Direction |
Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT0;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 5 on acq path 0 )
|
|
Timer information | Timer: M_TIMER1; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 2 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 3 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; |
![]() ![]() |
Description | |
MIL I/O information | ||
Pin information | ||
Direction | ||
User-bit information | ||
Trigger information | ||
Timer information | ||
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, field polarity input, or quadrature input bit 0. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO10;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 8+, 3-; Connector: DBHD-15 Pin: 4+, 5- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT10; Digitizer device #: M_DEV0; |
|
![]() ![]() |
LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (summarize)LVDS auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, timer clock input, or quadrature input bit 1. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO11;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 6+, 8- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT11; Digitizer device #: M_DEV0; |
|
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input, user input, or field polarity input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO6;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 7+, 2-; Connector: DBHD-15 Pin: 15+, 9- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT6; Digitizer device #: M_DEV0; |
|
![]() ![]() |
Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (summarize)Opto-isolated auxiliary signal (input) for acquisition path 0, which supports: trigger input or user input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO7;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 4+, 5-; Connector: DBHD-15 Pin: 12+, 11- | |
Direction |
Input |
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT7; Digitizer device #: M_DEV0; |
|
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, user input/output, or field polarity input. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO8;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DB-9 Pin: 1; Connector: DBHD-15 Pin: 1 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT2;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 2 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 0 on acq path 0. M_HARDWARE_PORT8; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER3; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO9;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 2 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT3;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 3 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 1 on acq path 0. M_HARDWARE_PORT9; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER1/M_TIMER4; Digitizer device #: M_DEV0; | |
![]() ![]() |
TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (summarize)TTL auxiliary signal (input/output) for acquisition path 0, which supports: timer output, trigger input, or user input/output. (more details...) |
|
MIL I/O information | MIL I/O #:M_AUX_IO2;
Digitizer device #: M_DEV0;
|
|
Pin information | Connector: DBHD-15 Pin: 3 | |
Direction |
Input/Output |
|
User-bit information |
MIL user-bit #: M_USER_BIT4;
Digitizer device #: M_DEV0;
(Hardware manual user signal rank 1 : 4 on acq path 0 )
|
|
Trigger information |
Trigger
controller: 2 on acq path 0. M_HARDWARE_PORT2; Digitizer device #: M_DEV0; |
|
Timer information | Timer: M_TIMER2; Digitizer device #: M_DEV0; |
1 The user-bit number in the Installation and Hardware Reference manual is just a rank; use the MIL user-bit number instead.